Total harmonic distortion
MONO / STEREO 0.2% / 0.3%
S/N
MONO / STEREO 73dB / 67dB
Frequency response 20Hz - 15kHz, +1dB, -2dB
Alternate channel selectivity 65dB
Capture ratio 1.5dB
Image rejection at 98MHz 40dB
Spurious response rejection at
98MHz
75dB
AM suppression 50dB
Stereo separation
1kHz / 10kHz 40dB / 30dB
Antenna terminal
75 (unbalanced)
AM TUNER SECTION
Frequency range / Sensitivity /
Selectivity / IF rejection at 1000kHz
530 - 1710kHz / 20 V,
330 V/m / 55dB / 50dB
VIDEO SECTION
Output voltage at 1V input 1±0.1Vp-p
(unbalanced)
Maximum input voltage / Input/
output impedance
1.5Vp-p / 75
GENERAL
Power supply / Power consumption
/ Dimensions (W x H x D)
AC120V, 60Hz / 380VA,
290W / 430 x 158 x 320.5mm
/ (16-15/16”x6-7/32”x12-5/
8”)
Mass 9.6kg (21.3lb.)
Power consumption in standby /
mode:
1W
Notes:
1. Specifications are subject to change without notice. / Mass and
dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum /
analyzer.
*
1
Manufactured under license from Dolby Laboratories
Licensing / Corporation. “Dolby”, the double-D symbol and
“PRO LOGIC” / are trade marks of Dolby Laboratories
Licensing Corporation.
*
2
This product is manufactured under license from DTS, / Inc.
of America.
SYSTEM
3