To Next PageTo Next PageWhat to do if my Panasonic SA-HE70 sound stops and “OVERLOAD” appears?
If the sound stops and “OVERLOAD” appears on the display of your Panasonic Receiver, switch off the unit, determine and correct the cause, then switch the unit on.
How to fix no sound on my Panasonic Receiver?
If there is no sound from your Panasonic Receiver, please check the following: Ensure the power cord is connected, turn the volume up, verify connections to speakers and other equipment, and make sure the speakers are turned on. Also, turn off the tape monitor and select the correct source. Change the D-INPUT setting to suit your connection type and confirm that the digital signals can be decoded by the unit. Turn PCM FIX or DTS FIX off, and cancel “DSP DEFEAT.” If the issue persists, switch the unit off and on again. If the positive and negative speaker wires are shorting, turn the unit off, disconnect the AC power cord, then reconnect and turn it on.
What to do if sound is not heard from center, surround, or subwoofer speakers on Panasonic SA-HE70 Receiver?
If you're not hearing sound from the center, surround, or subwoofer speakers on your Panasonic Receiver, make sure the SIZE settings for your speakers are correct. Check the DSP sound mode and cancel “DSP DEFEAT.” Additionally, ensure that DVD 6CH INPUT is turned off.
Crucial guidelines to prevent hazards and ensure safe operation of the audio equipment.
Guide for connecting DVD players, TV, VCR, and satellite receivers using various terminals.
Setting speaker size (LARGE/SMALL) and distance for accurate sound staging.
Configuring digital inputs and setting the bass cut-off filter for front speakers.
Steps to power on the unit, activate speakers, and select the desired audio/video source.
Choosing between STEREO, SURROUND, and SFC sound modes for enhanced listening experiences.
A guide to diagnose and resolve common issues like no power, no sound, or input selection problems.
Details of the product's limited warranty coverage, exclusions, and duration.
Procedures for obtaining service, replacement parts, and safety checks after repair.
General