Panasonic SA-XR57 User Manual (English)

Questions and Answers:

M
Madison GarciaAug 22, 2025
What to do if my Panasonic SA-XR57 stops and shows “OVERLOAD”?
- R
  Rebecca Cook MDAug 22, 2025
  If your Panasonic Receiver stops, “OVERLOAD” appears on the display, and the unit turns off, it could be due to several reasons: * Shorting of positive and negative speaker wires. * Using speakers with an impedance lower than that rated for this unit. * Straining of the speakers through excessive volume or power. * Using the unit in a hot environment without proper ventilation. Determine and correct the cause, then turn the unit on.
R
Robert BeasleyAug 23, 2025
What to do if my Panasonic SA-XR57 has no sound or the sound is distorted?
- B
  Benjamin RiveraAug 23, 2025
  If your Panasonic Receiver has no sound, or the sound is distorted, try the following: * Turn the volume up. * Check connections to speakers and other equipment. * Turn on the speakers. * Select the correct source. * Change DIG INPUT setting to suit the type of connection you have made. * Check that the digital signals can be decoded by this unit. * Turn the muting off. * Turn PCM FIX off. * Note that recording of some DVD-Audio may not be possible due to copyright protection.
D
David OsborneAug 25, 2025
How to fix a Panasonic SA-XR57 that has no power?
- T
  Thomas RandallAug 25, 2025
  If your Panasonic Receiver has no power, ensure the AC mains lead is connected.
C
Cheryl CervantesAug 27, 2025
Why is there noise and interference on my Panasonic Receiver radio?
- X
  xwatersAug 27, 2025
  If your Panasonic Receiver radio cannot be tuned in or has a lot of noise and interference: * Connect the appropriate antenna. You may need an outdoor antenna or one with more elements. * Adjust the position of the FM or AM antenna. * Reduce the treble. * Turn off nearby televisions, video decks, DVD recorder, DVD players, and satellite receivers. * Separate the antenna from other cables, cords, and appliances.
L
Loretta AndersonAug 27, 2025
How to troubleshoot no sound from center, surround, or subwoofer speakers on my Panasonic SA-XR57?
- S
  Suzanne HughesAug 27, 2025
  If you are not hearing sound from the center, surround, or subwoofer speakers on your Panasonic Receiver: * Ensure the speaker settings for your speakers are correct. * Confirm Dolby Pro Logic, NEO:6, or SFC settings, and select an adequate mode. * Switch MULTI CH SURROUND on when you play 2-channel stereo sources.
R
Rebecca CortezAug 29, 2025
What does it mean if the analogue input becomes distorted and the message 'OVERFLOW' appears on the display of my Panasonic SA-XR57 Receiver?
- J
  jessicapooleAug 29, 2025
  If the analogue input becomes distorted and the message “OVERFLOW” appears on the display during playback on your Panasonic Receiver, switch the attenuator on.
K
kellyrussoAug 30, 2025
Why is there no sound from the surround back speaker on my Panasonic Receiver?
- J
  jordankathrynAug 30, 2025
  If you are not hearing sound from the surround back speaker on your Panasonic Receiver: * Ensure the speaker settings for your speakers are correct. * Switch MULTI CH SURROUND on.
M
Mrs. Kelsey PriceSep 1, 2025
How do I fix the issue where the first few seconds of sound are cut off when using an HDMI connection with my Panasonic SA-XR57?
- S
  Scott ChavezSep 1, 2025
  If the first few seconds of sound are cut off when using an HDMI connection with your Panasonic Receiver: * If playing a chapter on a DVD, change the audio output setting on the DVD player or DVD recorder from “Bitstream” to “PCM”. Note that 6.1-channel sources will be played as 5.1-channel. * Select “PCMFIX ” as instructed in “Setting input signals” when you play 2-channel sources.
G
Gabriel AllenSep 2, 2025
Why can't I switch MULTI CH SURROUND on my Panasonic SA-XR57 Receiver?
- M
  Mr. Richard BrownSep 2, 2025
  If you cannot switch MULTI CH SURROUND on your Panasonic Receiver (Dolby Pro Logic, NEO:6, and SFC are unavailable): * Check if the center speaker, surround speakers, and surround back speakers are connected properly. * Switch SPEAKERS A on. * You cannot use the MULTI CH SURROUND effect when the input source contains PCM signals with sampling frequencies of 192 kHz. * Cancel DVD analogue 6-channel playback. * You cannot use the effect when the input source contains dual audio signals in Dolby Digital or DTS formats.
M
Michael DavidsonSep 3, 2025
Why is the sound distorted when using the Sound Field Control (SFC) on my Panasonic SA-XR57 Receiver?
- M
  Marilyn RobertsSep 3, 2025
  If the sound is distorted when using the Sound Field Control (SFC) on your Panasonic Receiver, depending on the input source, sound may be distorted if you increase the SFC effect level. If this happens, decrease the SFC effect level.

Panasonic SA-XR57 Specifications

General

Audio system	7.1
Channels quantity	7 channels
Dimensions (WxDxH)	430 x 394 x 107.5 mm
Output power description	80 / 100W
Line-in	Yes
Impedance	6 Ω
Frequency range	4 - 88000 Hz
Total Harmonic Distortion (THD)	0.9 %
I/O ports	- Component Video 3-in, 1-out - S-Video 3-in, 1-out - Video 5-in, 2-out - Digital In 4 (2-optical, 2-coaxial) - 6-ch Discrete In - Audio 7-in, 2-out - HDAVI - Subwoofer Out
Connectivity technology	Wired
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz

Weight and Dimensions

Weight	4500 g

Summary

Safety Precautions

AC Mains Lead and General Safety

Covers mains lead safety, placement, voltage, foreign matter, service.

Fuse Replacement Procedure

Step-by-step instructions for replacing the fuse in the AC mains plug.

Control Guide

Remote Control and Unit Displays

Explains remote control functions, unit indicators, and display elements.

Home Theater Connections

Connecting to TVs, DVD Recorders, and Players

Guides on connecting audio/video equipment like TVs, DVD recorders, and players.

HDMI Connectivity for High-Quality Signals

Details on using HDMI for superior digital audio and video transmission.

Home Theater Connections: Picture Quality

Connecting for High-Quality Pictures

Instructions on using various cables for optimal picture quality.

Video Terminal Information

Notes regarding input video signals and component video terminals.

Home Theater Connections: Standard Quality

Connecting for Standard-Quality Pictures

Guides on connecting for standard picture quality using various cables.

21-Pin Scart Cable Connection

Specific instructions for connecting using a 21-pin scart cable.

Home Theater Connections: Analogue Sound

Connecting for Analogue Sounds

Guides for making analogue audio connections using various cables.

DVD-Audio 6-Channel Connections

Instructions for high-quality analogue sound via DVD-Audio 6-channel.

Home Theater Connections: TV Audio

Connecting for TV Sounds on Multi Channels

How to connect for multi-channel TV audio using digital or analogue outputs.

Connecting to DVD Recorder with VCR

Specific connection guide for a DVD recorder that includes a VCR.

Connecting Speakers

Speaker Placement and Connection Guide

Guidance on ideal placement and connection of speakers for optimal sound.

Speaker Cable Connection

Instructions on how to properly connect speaker cables to terminals.

Speaker Connections Details

Speaker Impedance Requirements

Specifies the required impedance for different speaker types.

Connecting Bi-Wiring Speakers

Instructions for connecting speakers designed for bi-wiring.

Advanced Speaker and Antenna Connections

Connecting a Second Pair of Front Speakers

How to connect and use a second pair of front speakers for multi-room audio.

Connecting Antennas

Guides for connecting FM and AM antennas for radio reception.

Connecting Other Equipment

Connecting Cable/Satellite Receivers

How to connect cable or satellite receivers for audio output.

Connecting to a VCR

Guide for connecting a VCR for audio and video signals.

Connecting to a CD Player

How to connect a CD player for digital or analogue audio.

Connecting Video Cameras or Game Players

Temporary connections for video cameras or game players.

Before Playback Setup

Automatic Speaker Detection

Guides on how the unit automatically detects and sets up speakers.

Speaker Display Indicators

Explains the display indicators for detected speakers.

Confirming Speaker Output

Audio Output and Volume Adjustment

Steps to verify speaker output and balance volume levels.

Enjoying Home Theater Features

Basic Playback Operation

Steps for turning on the unit, selecting speakers, and choosing input sources.

Playing Back Selected Sources

How to play back selected sources and activate surround effects.

Understanding Digital Audio Signals

Supported Digital Signal Formats

Lists digital signal formats supported by the unit.

Audio Signal Display Indicators

Explains the display indicators for various audio signal types.

Playback Options

Using SPEAKERS B

How to use the SPEAKERS B terminals for stereo playback.

ADVANCED DUAL AMP Function

Explanation of the advanced dual amp function for enhanced audio.

Enjoying BI-AMP Sounds

How to achieve enhanced stereo sounds using bi-amp connections.

Playing DVD-Audio Sources

Guides for playing DVD-Audio sources via digital or analogue connections.

Using HDAVI Control

What is HDAVI Control?

Explanation of HDAVI Control for linked operation of Panasonic equipment.

Connecting for HDAVI Control

Steps to connect equipment and activate HDAVI Control.

One-Touch Home Theater Operations

How to operate multiple devices with a single button press.

Remote Control Operations

Remote Controlling a DVD Recorder

Instructions for operating a Panasonic DVD recorder with the remote.

Remote Controlling a TV

Instructions for operating a Panasonic TV with the remote control.

Remote Control Operations: DVD Player

Remote Controlling a DVD Player

Instructions for operating a Panasonic DVD player with the remote control.

Remote Control Operations: VCR and CD

Remote Controlling a VCR

Instructions for operating a VCR with the remote control.

Remote Controlling a CD Player

Instructions for operating a CD player with the remote control.

Changing Remote Control Codes

Entering Equipment Control Codes

How to enter codes to operate other brands' equipment.

Surround Sound Effects

Dolby Pro Logic IIx Modes

Explanation of Dolby Pro Logic IIx modes (Movie, Music, Game).

NEO:6 Modes

Explanation of NEO:6 modes (Cinema, Music) for surround effects.

Sound Field Control Modes

SFC (Sound Field Control) Modes

Guides on using SFC modes for music and movie playback.

Sound Effect Adjustments

Adjusting Dolby Pro Logic IIx 'MUSIC' Mode

Fine-tuning Dolby Pro Logic IIx 'MUSIC' mode settings.

Adjusting NEO:6 'MUSIC' Mode

Fine-tuning NEO:6 'MUSIC' mode settings for better audio.

Adjusting SFC Output Levels

How to adjust output levels for different speakers and the subwoofer.

Convenient Functions

Subwoofer Level and Speaker Silencing

Adjusting subwoofer level and temporarily silencing speakers.

Display Dimming and Headphone Use

Controls for dimming the display and using headphones.

Basic Sound Settings Operation

Entering and Navigating Menus

Steps to enter menus and select items for adjustment.

Audio Adjustments and Sleep Timer

Adjusting Bass, Treble, and Volume Balance

How to adjust bass, treble, and speaker volume balance.

Changing Audio Output and Sleep Timer

Switching dual audio signals and setting the sleep timer.

Setting the Receiver

Basic Operation for Receiver Settings

Steps to enter the setup menu and navigate settings.

Receiver Settings: Speakers and Filters

Setting Speaker Sizes and Distances

Manually setting speaker sizes and distances for optimal sound.

Setting Bi-Wiring and Lowpass Filter

Configuring bi-wiring connections and lowpass filter settings.

Receiver Settings: Inputs and Bi-Amp

Changing Digital Input Settings

Adjusting digital input settings for OPT and COAX terminals.

Setting Input Signals and Bi-Amp

Fixing input signals and configuring bi-amp settings.

Receiver Settings: Advanced Features

HDMI Terminal Equipment Selection

Selecting connected equipment for the HDMI input terminal.

Power Saving and Low Volume Listening

Adjusting standby power and listening comfortably at low volume.

Attenuator, Delay, and Reset Functions

Using attenuator, delaying audio, and resetting settings.

The Radio

Manual Tuning and AM Allocation

How to manually tune stations and adjust AM frequency steps.

Automatic Tuning

Guide for automatic station tuning and finding stations.

Radio Features

Preset Tuning Stations

Steps for auto-presetting and manually presetting radio stations.

Reducing Excessive Noise

Methods for improving FM stereo and AM reception quality.

RDS Broadcasts

Changing the Display Mode

How to change the display to show RDS information like station name.

Troubleshooting Guide

Common Problems and Remedies

Solutions for common issues like no power, no sound, or distorted audio.

Radio and HDMI Issues

Troubleshooting for radio reception and HDMI connection problems.

Remote Control and Display Issues

Resolving problems with the remote control and display brightness.

Help Messages and Specifications

Understanding Help Messages

Explains common on-screen messages and their countermeasures.

Technical Specifications

Detailed technical specifications for amplifier, tuner, and video sections.

Important Safety and Environmental Precautions

Installation and Ventilation Warnings

Cautions on unit placement, ventilation, and avoiding heat sources.

Handling Batteries and Product Care

Guidelines on battery disposal and protecting the unit from liquids.

Supplied Accessories and Maintenance

List of Included Accessories

Lists all accessories provided with the unit.

Cleaning and Product Care

Instructions on how to clean and maintain the unit.

Related product manuals

Panasonic SA-XR57 User Manual

Table of Contents

Questions and Answers:

Panasonic SA-XR57 Specifications

Summary

Safety Precautions

AC Mains Lead and General Safety

Fuse Replacement Procedure

Control Guide

Remote Control and Unit Displays

Home Theater Connections

Connecting to TVs, DVD Recorders, and Players

HDMI Connectivity for High-Quality Signals

Home Theater Connections: Picture Quality

Connecting for High-Quality Pictures

Video Terminal Information

Home Theater Connections: Standard Quality

Connecting for Standard-Quality Pictures

21-Pin Scart Cable Connection

Home Theater Connections: Analogue Sound

Connecting for Analogue Sounds

DVD-Audio 6-Channel Connections

Home Theater Connections: TV Audio

Connecting for TV Sounds on Multi Channels

Connecting to DVD Recorder with VCR

Connecting Speakers

Speaker Placement and Connection Guide

Speaker Cable Connection

Speaker Connections Details

Speaker Impedance Requirements

Connecting Bi-Wiring Speakers

Advanced Speaker and Antenna Connections

Connecting a Second Pair of Front Speakers

Connecting Antennas

Connecting Other Equipment

Connecting Cable/Satellite Receivers

Connecting to a VCR

Connecting to a CD Player

Connecting Video Cameras or Game Players

Before Playback Setup

Automatic Speaker Detection

Speaker Display Indicators

Confirming Speaker Output

Audio Output and Volume Adjustment

Enjoying Home Theater Features

Basic Playback Operation

Playing Back Selected Sources

Understanding Digital Audio Signals

Supported Digital Signal Formats

Audio Signal Display Indicators

Playback Options

Using SPEAKERS B

ADVANCED DUAL AMP Function

Enjoying BI-AMP Sounds

Playing DVD-Audio Sources

Using HDAVI Control

What is HDAVI Control?

Connecting for HDAVI Control

One-Touch Home Theater Operations

Remote Control Operations

Remote Controlling a DVD Recorder

Remote Controlling a TV

Remote Control Operations: DVD Player

Remote Controlling a DVD Player

Remote Control Operations: VCR and CD

Remote Controlling a VCR

Remote Controlling a CD Player

Changing Remote Control Codes

Entering Equipment Control Codes

Surround Sound Effects

Dolby Pro Logic IIx Modes

NEO:6 Modes

Sound Field Control Modes

SFC (Sound Field Control) Modes

Sound Effect Adjustments

Adjusting Dolby Pro Logic IIx 'MUSIC' Mode

Adjusting NEO:6 'MUSIC' Mode

Adjusting SFC Output Levels

Convenient Functions

Subwoofer Level and Speaker Silencing