23
RQT8552
Before use
Two or more Panasonic audio equipment may start
functioning when you use the unit’s remote control for
operating the equipment.
Switch the unit’s remote control code to
“REMOTE 2 ” in such cases.
Use the same code for setting the unit and its remote
control through the following steps.
Changing remote control codes
MENU
SETUP
RETURN
INPUT SELECTOR
ENTER
VOLUME
HDMI
TUNE
MENU
SETUP
RETURN
INPUT SELECTOR
ENTER
INPUT SELECTOR
ENTER
MENU
SETUP
RETURN
Basic operation
Turn to make
a choice.
Press to confirm
your choice.
To return to the
previous display/
To cancel
Operation on the main unit
1 Enter the setup.
Press and hold for approximately 2 seconds.
2
Select and confirm the setting
.
3
Select and confirm the setting.
4 Press [-MENU, –SETUP,
RETURN] to select “EXIT ”
and press [ENTER].
Operation on the remote control
5 Press
6
Press and
simultaneously and hold them in the
position for approximately 2 seconds.
When you return the remote
control code to “1”
• Operation on the main unit: select “
1
” in step 3.
•
Operation on the remote control: press
[ENTER] and [1] simultaneously and hold
them in the position for approximately 2
seconds or longer in step 6.
MENU
SETUP
RETURN
TUNER
BAND
ENTER
Code table
INNO HIT 34 – –
ITT –
08/10/11/37
–
ITT/NOKIA 05/07/37 18/27/37 –
JVC 18 20/21 09
KENDO 40 08/09/37 –
KENWOOD ––15
LOEWE 14/33 03/32 –
LOEWE OPTA
32 – –
LUXOR 37
08/10/11/17/
19/37
–
MATSUI
METZ –01–
MITSUBISHI 14/19/28/36 17/19/21/32
06
02/05/06/07/10/
11/12/25/37/38
03/05/09
–
NEC –
05/07/37
04/21/36/37
08/10/11/18/
22/27/37
–
NOKIA
NORDMENDE
OCEANIC
20/21
–
02
–
–
OKANO –
27/35
06 –
ORION
02/03/05/10/
11/12/38
05/09 –
PHILIPS
11/12/13/15
22/32/33/34/35
04/16
PIONEER ––03
POLKAUDIO
––16
PHONOLA 11/12 32 –
RADIOLA 11/12 – –
RAITE ––13
26/41
RCA ––02
RFT –33–
ROADSTAR
39
02/03/18/23/27
–
SABA 26/41 21 02
SALORA 07/37
08/11/17/19/37
–
SAMPO ––14
SAMSUNG
11/12/15/21/
25/34/39
15/16/18/27
10
SEG 39/40
02/18/23/27
–
SCHNEIDER
11/12
02/03/18/23/27/32
–
SANYO
07/17/25/37
07/10/11 –
SELECO 11/24 – –
SHARP 17/20 22 08
SIEMENS
11/12/17/28/36
03/10/11/32
–
SINUDYNE
02/05/11/12/
22/24/38/40
––
SCHAUB LORENZ
–
10
–
SONY 16 24/25/26 05
TECHNICS ––01
THOMSON 05/26/41 21 02
THORN
06/08/11/12/
14/16/25/32
10
–
UNIVERSUM
YAMAHA ––01
TOSHIBA
03/04/06/08 15/17/19/32
04
ZENITH
– – 07/12
39
03/08/32/37
–
WHITE WESTIN
HOUSE
11/12/22/40
–
–
TV VCR
DVD
player
PANASONIC 01/29/30/31
07/11/28/36/
37
01/29/30
06/08/16/17/
19/37
01
AKAI
ALBA
BAIRD
02/06/23
08/10/37
–
–
–
BAUR 32
–
––
BLAUPUNKT
28/36
01/26/29/30/33
–
BRANDT 26/41 – –
BUSH
02/05/10/11/
12/32/38
02/09/23 –
DAEWOO 11/12/32 15 –
DENON – – 01/17
DUAL 32 – –
FERGUSON
11/12 31 02
FINLUX
11/12/22/23/
24/25/40
––
FISHER 37
05/07/10/11/12
–
FUNAI 02/38 – –
GOLDSTAR
11/12 – –
GOLDSTAR/LG
–
03/04/36/37
–
GOODMANS 11/12/25/32
02/03/18/23/
27/33
–
HITACHI
01/09/26/41
13/14 11
HCM – 02/23 –
ICE 21/39 – –
GRUNDIG 28/36
02/23/26/28/
32/33
–
05/11/12
GO-VIDEO
–
–
12
• Note that this remote control cannot
operate some equipment and that it may
not be able to perform some operations.
• Re-enter the codes after you change the
batteries.
Changing the codes
The remote control outputs the on/off
signal.
If the code is correct, the equipment
turns on or off.
If it doesn’t, try entering another code.
TV
VCR
DVD
PLAYER
ANALOG 6CH
0
TV VCR DVD player
Press and hold the button
corresponding to the equipment.
Enter the first digit.
0
Enter the second digit.
This remote control can operate Panasonic and Technics audio-visual equipment that
has remote control sensors. You may need to change the remote control code.
It can also operate some other brands of televisions, video cassette recorders, and DVD
players. Check the table for the brand and enter the code as follows.
Enter a code to operate some equipment
Remote controlling a TV or DVD recorder etc.
ENGLISH
To Next Page
Loading...
