You can tune radio stations manually by selecting the station’s
frequency.
ILWD players can interfere witli radio reception. Turn
the
I.&T player
off or move it further away frown tho antennas if this occurs.
“107.9 Ml-h, press [I] - [0] * [7] * 191
FM ... 0.l MHz
AM -I. 10 kklz
@ If yau do not press a button while the cursor is flashing, the
display returns to the frequency being received.
Q If the frequency has nof. been input correctly, “ERROR” will be
displayed.
re preset in channels 1 to 30.
re preset in channels 21 to 30.
(FIW stations are replaced ii any were preset in these channels.)
_- - ,,“,, .i .--.. --_--
During auiomatic presetting, the memory indicator (
the frequency scrolls. The rnemory indicatar and channel numbers
are displayed for a second when a station is preset.
The last station to be preset is displayed when presetting finishes.
For yoaar ~~~e~e~~~~
Even if the pawer supply cord is disconnected from the household
AC outlet, the staiions remain in memory for approximately one
month,
ns one at a time.
shes for about 5 seconds.
Hold down the butlons to change channels faster.
Press [{~~I~NN~l”. A or V ].
or
Press the numbered buttons.
For channels 1 Lo 9, press the corresponding number.
For channels IO or over, press [>.I O/ENTEF:], then the two digits.
e.g. To selec% channel 21: [~~lO/ENTEl?~ -p L2]
* [I]
To Next Page
Loading...
