To Next PageTo Next Page
Need help?Do you have a question about the Panasonic SA-HT210 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Tuner | AM/FM |
| Total Harmonic Distortion | < 0.1% |
| Frequency Response | 20 Hz - 20 kHz |
| Input Sensitivity | 200 mV |
| Dimensions | 430 x 100 x 250 mm |
| Weight | 3.5 kg |
| Signal-to-Noise Ratio | 80 dB |
| Output Power | 100 W |
| Power Output | 100W per channel (6 ohms, 1kHz, THD 10%) |
| Inputs | RCA (Audio) |
| Outputs | RCA (Audio) |
| Surround Sound Formats | Dolby Pro Logic |
| Speaker Impedance | 6 ohms |
Step-by-step instructions for correctly inserting batteries into the remote.
Advice on positioning front, center, and surround speakers for optimal sound.
Specific instructions and warnings for connecting surround speakers.
Details on connecting subwoofers, including those without built-in amplifiers.
Steps for powering the unit, enabling speakers, and setting initial volume.
How to choose audio/video sources and adjust listening volume.
How to tune radio stations using the receiver's tuning buttons.
Using the remote control for precise station frequency input.
How the unit automatically scans and stores radio stations into memory.
Step-by-step guide to manually save desired radio stations to memory channels.
Solutions for noise, static, and distortion during FM listening.
Remedies for unusual sounds and hum during AM listening.
Solutions for issues like no power, no sound, and overload indications.
Detailed performance data for the receiver's amplifier, tuners, and video sections.
