Need help?Do you have a question about the Panasonic SB-DT300 and is the answer not in the manual?
General| Power output | 50W per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
|---|---|
| Frequency response | 10Hz-100kHz (±1dB) |
| Total harmonic distortion | 0.08% (20Hz-20kHz, 8 ohms) |
| Input sensitivity | 250mV (line) |
| Dimensions | 360 x 105 x 300mm |
| Weight | 4.8kg |
| Tuning range | FM, MW |
| Speaker load impedance | 6Ω to 16Ω |
| Speaker Impedance | 6Ω to 16Ω |
Detailed steps for checking the digital amplifier printed circuit board.
Steps to check the FL (Fluorescent) printed circuit board.
Procedures for replacing the FL, headphone, and operation PCBs.
To Next Page