Panasonic SA-HT210

Facing toward the cassette | To switch the remote
deck contro! transmitter to MOTOR Be sure to press this button before operating
cassette deck opera- Cd the cassette deck.
tion mode
Only when using a double
cassette deck The remote control indicator of the cassette deck will change
To select the tape deck Cy. each time the button is pressed.
(DECK 1/DECK 2)
4 >
To start playback Cw CD
(Reverse) (Forward)
While the tape is stopped
M4/44 DD
To fast-forward or GC
rowing ine: tape With TPS-equipped cassette decks, while the tape is playing, you can move
to the beginning of a track by pressing these buttons.
To stop playback
SL-PG440, SL-PD847, SL-PD947, SL-PS840, SL-PD667, SL-P9066, SL-PD867, SL-PD967, SL-PD1000, SL-PD687,
SL-PD787, SL-PD887, SL-PD987, SL-PD1010, SL-MC50, SL-MC60, SL-MC300, SL-MC400, SL-MC700
Some of the above models are not sold in certain areas.
To operate laser disc player
The below procedures are examples for when a laser disc player is connected to the “TV/DVD” terminals of the receiver.
Facing toward the TV Facing toward the Facing toward Facing toward the
laser disc player the receiver laser disc player
Set the
POWER TVNIDEO TV/DVD VDP
dios mode on? O ©
|
the
TV
to
Switch
ON
the
Switch
ON
the
“VIDEO”.
power for TV. power for laser
disc player.
Play will begin.
In the play mod
To search for the desired position VDP M4/44 Pej
ODs OO
To stop play
To switch OFF the power for TV
To switch OFF the power for laser disc
player