Panasonic SA-HT210

Basic
operations
"E
Before operation, set VOLUME to the "MIN" position.
Press POWER.
Press SPEAKERS and check the "SPEAKERS"
indication lights up.
If the button is pressed once more, the indicator will switch
off and no sound will be heard from the speakers.
Caution
Before using your speaker system, make sure impedance is
correct in the speakers you want to use. (See page 9.)
Press to select the desired source, and start the
desired source.
(Refer to the appropriate operating instructions for details.)
Operation uu
VCR: To watch video tapes (VCR)
TV/DVD: To watch TV or DVD
TAPE MONITOR |: To listen to cassette tapes (The tape
monitor indicator will appear.)
(See below.)
CD: To listen to compact discs
TUNER: To listen to radio broadcasts
PHONO: To listen to phono discs
To watch a video (or DVD) or the TV, set the TV to either the
TV mode or VIDEO mode as indicated below.
* To enjoy videos (or DVD)
Set it to VIDEO mode.
e To watch TV
Set it to TV mode.
Turn VOLUME to adjust the volume level.
VOLUME
RÉ
Hip
RENTE
LITE
—
ten
Cain
After listening is finished
t Be sure to reduce the volume level, and switch the power to the
: standby condition by pressing POWER.
MIN MAX
When the tape monitor indicator is lit or flashing B
This indicates that the tape monitor function of this unit is ON.
To listen to sources other than a tape, be sure to press
[TAPE MONITOR] X CE! TAPE MONITOR | and check the indicator goes out.
PURA pud