Panasonic SA-HE200 - Speaker Connections; Speaker Placement, Settings, and Cable Connection

suit the size and number of speakers you c;onnocl.
or speakers tha’t call reproduce a full sound ratqe,
particularly the bass range below 100 I IL
L: For speakers that cannot adeyualely reprodtice the
bass range. This setting is sufficient for tnosl. speakers
if you are using a subwoofer.
“SUB.-WFR” is set: lo “YES” if you seloc:‘l Lhir; setiing for
“FFKXW”.
: For speakers you haven? connedetl (cenler; sitrro~~nd
or surround back). You cannal change the “SIJR IHCK”
setting if you select ihis setting for “S~J~~~~~Jl~~~~“,
&E: If you connect one surraund bar:k speaker ‘CO ‘cho
speaker ‘rerminal.
L: If you connect two surround back speakers via a power
amplifier lo Ihe pre-out Ierminal.
YES: If you connect a subwooier
: if you do noa connect a subwoofer.
“FRONT” is set In “I.ARGE” if you select ‘L/I& selting.
CE
Change so the sound from the speakers reaches you at the same time.
p%,*a,- .s,- ,- -+b.T*,m>-
.A
,;:2’
/
&?
i,’
(;” ( )
Kully lighien the Terminal,
,/,%
,’
then inser’r,
‘,‘. ---._