17
RQT7089
Disc operations
[DVD-A] [VCD] [CD]
[DVD-A]
The unit plays tracks in all the groups on a disc.
Press [1] (play).
You can select up to 24 items to play in the order you choose.
[VCD] [CD] (There is no on-screen display.)
You can program all the items on discs.
[DVD-A]
You can program all the items on a disc in the play position.
1 [VCD] [CD]
Press the [DISC] and then the disc
button ([DISC 1]–[DISC 5]).
2 Press the numbered buttons to select
a group or track.
≥To select a 2-digit number
Example: To select item 25, press [S10] ➡ [2] ➡ [5].
≥Repeat steps 1 and 2 to program other items.
≥[VCD] [CD]
Step 1 is unnecessary when programming tracks on the
same disc.
≥[DVD-A]
To select an item using the cursor buttons
Press [ENTER] and [3, 4] to select an item, then press
[ENTER] again to register the number.
All the items in the selected disc or group are selected when
you select “ALL”.
3 Press [1] (play).
To add or change the program
[VCD] [CD] (Add only)
Repeat steps 1 and 2.
[DVD-A]
Press [3, 4] to select an available item, then repeat step 2.
To clear an item
[VCD] [CD]
Press [CANCEL].
[DVD-A]
1 Select the item you want to clear with [3, 4].
2 Press [CANCEL], or select “Clear” with [3, 4, 2, 1] and press
[ENTER].
To clear the whole program
[VCD] [CD]
Press [∫] so “CLEAR” is displayed.
[DVD-A]
Select “Clear all” with [3, 4, 2, 1] and press [ENTER].
\Note\
≥[VCD] [CD]
Items the unit cannot find can be programmed but are canceled
during play. This is also the case if you program DVD-RAM, DVD-
Audio, DVD-Video, WMA, MP3 and JPEG.
≥[DVD-A]
The program is cleared when you switch the unit to standby, select
another source, exit the program mode by pressing [PLAY MODE] or
open the disc tray.
[VCD]
[CD]
The program is retained in memory.
[VCD] [CD] (There is no on-screen display.)
RANDOM: You can play a disc in the play position in random order.
RANDOM ALLDISC: You can play all discs in random order.
[DVD-A]
You can play items on a disc in the play position in random order.
1 [DVD-A]
Press the numbered buttons to select
a group.
[DVD-A]
≥You can select more than one group.
≥To enter all groups, select “All” using [2, 1] and press
[ENTER].
≥To deselect a group, press the numbered buttons
corresponding to the group you want to clear.
2 Press [1] (play).
[Note\
[VCD] [CD]
During random play, empty trays are skipped and the playback
control function on Video CDs is canceled.
Common procedures for all group, program
and random play
While stopped
Press [PLAY MODE].
Each time you press the button:
[DVD-A]
All group>Program> Random>off (Normal play)
^------------------------------------------------------------------}
[VCD] [CD]
PRGM
>
RANDOM
>
RANDOM ALLDISC
>
off (Normal play)
^------------------------------------------------------------------------------------------}
[DVD-A]
If you select bonus groups, you will have to enter a password
(➡ page 15).
All group play
Program play
PROGRAM
Choose a group and track, then press ENTER.
No Time
G
Press PLAY to start
Play
Clear
Clear all
SELECT
ENTER RETURN
1
T
SELECT
NUMBER
09
Total Time
0:00
Example [DVD-A]
DISC
PRGM
Disc No.
Track No.
Program No.
Example [CD]
Random play
RANDOM
Example [DVD-A]
Random Playback
Choose a group or groups,
then press ENTER.
SELECT
NUMBER
09
SELECT
ENTER RETURN
All 234 65978
0Press PLAY to start
1
7089en.book 17 ページ ２００３年４月２８日 月曜日 午前９時２８分
To Next Page
Loading...
