8
RQT7089
Simple setup
∫ Connecting a television with a VIDEO IN
terminal
Connect directly to your television
Do not connect the unit through a video cassette recorder,
because the picture may not be played correctly due to the copy
guard.
∫ Connecting a television with an S-VIDEO IN
terminal
S-VIDEO OUT terminal
The S video terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance
(Y) signals. (Actual results depend on the television.)
∫ Connecting a television with COMPONENT
VIDEO IN terminals
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive
output and provide a purer picture than the S-VIDEO OUT
terminal. Connection using these terminals outputs the color
difference signals (P
B/PR) and luminance signal (Y) separately in
order to achieve high fidelity in reproducing colors.
≥The description of the component video input terminals depends
on the television or monitor (e.g. Y/P
B/PR, Y/B-Y/R-Y, Y/CB/CR).
Connect to terminals of the same color.
≥After making this connection, change the black level for a better
picture (➡ page 32, Video—Black Level Control).
STEP3 Television
Video cable
VIDEO
IN
Television
(not included)
Video cable
(included)
S-VIDEO
IN
S-video cable (not included)
To enjoy progressive video
≥Connect to the component video (480P) input terminals on a
television compatible with this unit’s copy guard system.
(Video will not be displayed correctly if connected to an
incompatible television.)
≥Press [PROGRESSIVE OUT] on the main unit so
“PROGRESSIVE” appears on the display (➡ page 12).
≥All televisions manufactured by Panasonic and that have 480P
input connectors are compatible. Consult the manufacturer if
you have another brand of television.
COMPONENT
VIDEO IN
P
B
P
R
Y
Video cables
(not included)
7089en.book 8 ページ ２００３年４月２８日 月曜日 午前９時２８分
To Next Page
Loading...
