5
3.1. Center Speaker (SB-HC190P-K)
3.1.1. Disassembly of Full Range Speaker
(SP21)
Step 1 : Remove 8 screws.
Step 2 : Upset the unit.
Step 3 : Slightly lift up Front Cabinet Assembly as shown.
Caution : Do not exert too much force as it may damage
the speaker wires within.
Step 4 : Lift up the Full Range Speaker (SP21) slightly.
Caution : Do not exert too much force as it may damage
the speaker wires within.
Step 5 : Detach the Black (-) and Red (+) wires.
Step 6 : Remove the Full Range Speaker (SP21).
To Next Page
Loading...
