To Next PageTo Next PageWhat does 'PGM FULL' mean on my Panasonic SC-EN38 Stereo System?
If you see 'PGM FULL' on your Panasonic Stereo System, it means the number of programmed tracks is limited to 24. No further tracks can be programmed.
What does '--:--' on the display of my Panasonic SC-EN38 Stereo System mean?
If the display shows '--:--', it means you plugged the AC power supply cord in for the first time or there was a power failure recently. Set the time.
Why does the picture on the television near my Panasonic SC-EN38 Stereo System disappear or show stripes?
If the picture on the television near the set disappears or stripes appear on the screen, the location and orientation of the antenna may be incorrect. Correct the location and orientation of the antenna. Also, separate the antenna wire of the television from the unit because the television antenna wire may be too close to the unit.
What to do if my Panasonic Stereo System has no sound or a lot of noise?
If you're experiencing no sound or excessive noise, several factors could be at play. First, ensure the recording quality is good if playing MP3 files, as poor quality can introduce noise. If interference is apparent, keep the unit away from mobile telephones. Also, make sure the volume isn't too low. If problems persist, switch the unit off, identify and fix the cause, then switch it back on. Check for shorting of speaker wires and avoid excessive power usage, as these can also cause sound issues.
What causes a beat sound or noise while receiving a radio broadcast on my Panasonic Stereo System?
If you're hearing a beat sound or noise during radio broadcasts, the TV or other audio player may be interfering. Try switching the TV or other audio player off or separating it from the unit. Also, switch off the portable audio player connected to “MUSIC PORT”.
Why is humming heard during play on my Panasonic SC-EN38?
If you hear humming during play, it may be because an AC power supply cord or fluorescent light is near the cords. Keep other appliances and cords away from this unit’s cables.
How to troubleshoot unfixed or reversed sound on Panasonic Stereo System?
If the sound is unfixed, reversed, or only coming from one speaker, check the speaker connections.
Why can't my Panasonic SC-EN38 read MP3 files?
Your Panasonic Stereo System may not be able to play MP3 files if you have copied a multi-session disc that has no data between sessions. Ensure the multi-session disc has data between sessions. Also, when creating a multi session disc, it is necessary to close the session. Finally, set the amount of data to greater than approximately 5 MB because the amount of data on the disc may be too small.
Why does my Panasonic SC-EN38 Stereo System display 'NO PLAY' when using USB?
If your Panasonic Stereo System displays 'NO PLAY' when using USB, check the content. Only MP3 format files can be played, so ensure only MP3 format files are on the drive.
What causes beat sound or noise when receiving radio broadcast on Panasonic SC-EN38 Stereo System?
To address a beat sound or noise heard while receiving a radio broadcast on your Panasonic Stereo System, switch the TV or other audio player off or separate it from the unit. Also, switch off the portable audio player connected to 'MUSIC PORT'.
General| Supported radio bands | AM, FM |
|---|---|
| Radio Data System (RDS) | Yes |
| Type | Home audio micro system |
| Product color | Black |
| Speaker depth | 124 mm |
| Speaker width | 121 mm |
| Speaker height | 203 mm |
| Dimensions (WxDxH) | 252 x 203 x 134 mm |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 1 |
Weight and Dimensions| Weight | 1900 g |
|---|
Covers essential safety guidelines for operating the apparatus safely and effectively.
Highlights critical warnings regarding fire, electric shock, laser radiation, and ventilation hazards.
Detailed explanation of each button on the remote control and its function.
Identifies and describes the controls and ports located on the main unit.
Instructions for programming and playing custom track sequences for CD and MP3 discs.
Instructions for automatic and manual presetting, and selecting stored radio stations.
Guide to inserting an iPod into the dock and how the unit charges it.
Instructions for selecting and playing audio content from a connected iPod.
Instructions for setting the unit's clock and configuring timer functions like sleep and play timers.
Explains EQ presets, Live Virtualizer, D.BASS, and Re-master functions for audio tuning.
Guidelines for service requirements, parts, safety checks, and product support contacts.
Solutions for issues like no playback, unreadable MP3s, or distorted sound.
Solutions for iPod not turning on, not charging, or unable to use PC Sync.
