Panasonic SC-HC28 User Manual

8
RQT9736
Preparation
≥ Turn the unit on.

≥ A station previously stored is overwritten when another
station is stored in the same channel preset.
1 Press [PLAY MENU] to select “A.PRESET”.
2 Press [3, 4] to select “LOWEST” or “CURRENT”
and then press [OK].
LOWEST:
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to “Manual tuning and
presetting”.
The tuner starts to preset all the stations it can
receive into the channels in ascending order.
Preparation
1 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2 Press [3, 4] to select “PRESET” and then press
[OK].
Press [:/6] or [5/9] to select the channel.
∫ Manual tuning and presetting
Select a radio broadcast.
1 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2 Press [3, 4] to select “MANUAL” and then press
[OK].
3 Press [:/6] or [5/9] to tune to the
required station.
≥ To start automatic tuning, press and hold [:/6],
[5/9] until the frequency starts scrolling. Tuning
stops when a station is found.
To preset the channel
4 While listening to the radio broadcast
Press [OK].
5 Press [3, 4] to select the channel and then press
[OK].
∫ To improve FM sound quality
1 While receiving FM broadcasts, press
[PLAY MENU] repeatedly to select “FM MODE”.
2 Press [3, 4] to select “MONO” and then press
[OK].
≥ This setting can be preset and memorised. To do so,
continue to step 4 of “Manual tuning and presetting”.

≥ Select “STEREO” in step 2 to return to stereo broadcasts.
≥ “MONO” is cancelled if the frequency is changed.

≥ “STEREO” is displayed when this unit tunes to a stereo
broadcast.
Listening to the radio
You can preset up to 30 FM channels / 15 AM
channels.
≥ Make sure that the antennas are connected. (l 5)
≥ Press [RADIO] to select “FM” or “AM”.
Presetting stations automatically
To begin auto preset with the lowest frequency
(FM 87.50, AM 520 or AM 522).
Listening to a preset channel
≥ If “MONO” is selected, regardless of the type of signal this
unit is receiving, “FM MONO” is displayed. (l below)
∫ To display the current FM signal status
While receiving FM broadcast, press [DISPLAY].
“FM ST”: The FM signal is in stereo.
“FM”: The FM signal is in monaural.
≥ “FM” is also displayed even if this unit is not tuned to a
station.
SC-HC28_GN~RQT9736-L.book 8 ページ ２０１３年２月２６日 火曜日 午後１時３９分

Panasonic SC-HC28 Specifications

General

RMS rated power	- W
Audio output channels	2.0 channels
Bluetooth	No
Headphone connectivity	-
USB 2.0 ports quantity	1
Micro-USB docking connector	Yes
Apple docking compatibility	iPad mini, iPhone 5, iPod Nano 7, iPod Touch 5
Playback disc types	CD, CD-R, CD-RW
Supported radio bands	FM
Preset stations quantity	30
Product color	Black
AC input voltage	120 V
Power source type	AC
AC input frequency	60 Hz

Weight and Dimensions

Weight	1996 g