Control guide
Standby indicator [^]
When the unit is connected to the AC mains supply,
this indicator lights up in standby mode and goes out
when the unit is turned on.
Standby/on switch [8]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still consuming
a small amount of power.
Main unit
Display
Remote control signal sensor
[-MENU,
―
SETUP, RETURN]
For entering menus to make
various settings.
For returning to previous
menus.
•
•
[TUNE, 3, 4]
For tuning the radio
and selecting menu
or setup items.
[MUSIC PORT]
You can playback sound from portable audio
equipment.
Reduce the volume to minimum before connecting
and disconnecting the equipment.
Use an audio cord for connection.
•
•
•
[kHz, MHz]
Frequency unit indicators
kHz: AM, or PCM sampling
frequency
MHz: FM
[TUNED, ST, MONO]
Radio indicators
TUNED: A station is tuned
ST: A stereo FM broadcast is tuned
MONO: You have switched to monaural mode to
improve reception
[SLEEP]
Sleep timer indicator.
General display
Shows the input mode, radio frequency and other
general information.
[ENTER]
Used during menu or setup
operations.
[M]
F la s h e s o r l ig h t s
during presetting.
To Next Page
Loading...
