EasyManua.ls Logo

Panasonic SC-HT60 - Specifications; Amplifier and Speaker Specifications; Tuner and General Specifications

Panasonic SC-HT60
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
RQTV0110
Specifications
Specifications (DIN 45 500)
g AMPLIFIER SECTION
RMS output power of each channel driven
10 % total harmonic distortion
1 kHz front CH 90 W per channel (4 )
1 kHz surround CH 90 W per channel (4 )
1 kHz center CH 220 W per channel (6 )
100 Hz subwoofer CH 220 W per channel (6 )
Total RMS output power 800 W
Rated minimum sine wave RMS power output
1% total harmonic distortion (Dolby Digital mode)
1kHz front CH 50 W per channel (4 )
1kHz surround CH 50 W per channel (4 )
1kHz center CH 150 W per channel (6 )
100 Hz subwoofer CH 150 W per channel (6 )
Total RMS output power 500 W
Total harmonic distortion
Half power at 1 kHz (Front CH) 0.5 % (4 )
Input sensitivity
GAME/AUX, TV, DVR/DVD-P 450 mV, IHF'66
MUSIC PORT 250 mV, IHF'66
S/N at rated power (4 )
GAME/AUX, TV, DVR/DVD-P 80 dB (85 dB, IHF'66)
MUSIC PORT 70 dB (85 dB, IHF'66)
Input impedance
GAME/AUX, TV, DVR/DVD-P, MUSIC PORT 47 k
Tone controls
BASS 50 Hz, +10 to -10 dB
TREBLE 20 kHz, +10 to -10 dB
g FM TUNER SECTION
Frequency range 87.50 MHz to 108.00 MHz
Sensitivity
S/N 30 dB 1.9 µV/75
S/N 26 dB 1.8 µV/75
S/N 20 dB 1.6 µV/75
IHF usable sensitivity (IHF '58) 2.2 µV/75
IHF 46 dB stereo quieting sensitivity 22 µV/75
Total harmonic distortion
MONO 0.2%
STEREO 0.3%
S/N
MONO 60 dB (71 dB, IHF)
STEREO 58 dB (65 dB, IHF)
Frequency response 20 Hz to 15 kHz, +1 dB, -2 dB
Image rejection at 98 MHz 40 dB
IF rejection at 98 MHz 70 dB
Stereo separation (1 kHz) 40 dB
Antenna terminal 75 (unbalanced)
g AM TUNER SECTION
Frequency range 522 kHz to 1611 kHz (9 kHz steps)
530 kHz to 1620 kHz (10 kHz steps)
Sensitivity 500 µV/m
Selectivity (at 999 kHz) 30 dB
g SPEAKER SECTION
Front and surround speakers (SC-HT40: SB-PF41, SB-PS41
)
Type 1 Way, 1 Speaker, Bass-ref.
Speaker unit
Full range 6.5 cm cone type x 1, 4
Input power (IEC) 90 W (Max)
Output sound pressure level 76 dB/W (1.0 m)
Frequency range 110 Hz to 22 kHz (-16 dB)
120 Hz to 21 kHz (-10 dB)
Dimensions (W x H x D)
92 mm x 135 mm x 95.4 mm
Mass [SB-PF41]: 0.65 kg
[SB-PS41]: 0.7
kg
Front speaker (SC-HT60: SB-FS61)
Type 2 Way, 2 Speaker, Bass-ref.
Speaker unit
Full range 6.5 cm cone type x 1, 4
Tweeter 6 cm cone type x 1, 4
Input power (IEC) 90 W (Max)
Output sound pressure level 82 dB/W (1.0m)
Frequency range 85 Hz to 45 kHz (-16 dB)
100 Hz to 40 kHz (-10 dB)
Dimensions (W x H x D)
250 mm x 1125 mm x 234 mm
Mass 3.6 kg
Surround speaker (SC-HT60: SB-FS62)
Type 1 Way, 1 Speaker, Bass-ref.
Speaker unit
Full range 6.5 cm cone type x 1, 4
Input power (IEC) 90 W (Max)
Output sound pressure level 80 dB/W (1.0m)
Frequency range 85 Hz to 45 kHz (-16 dB)
95 Hz to 40 kHz (-10 dB)
Dimensions (W x H x D) 250 mm x 1125 mm x 234 mm
Mass 3.6 kg
Center speaker (SC-HT40: SB-PC40)
Type 1 Way, 2 Speaker, Bass-ref.
Speaker unit
Full range 6.5 cm cone type x 2, 6
Input power (IEC) 220 W (Max)
Output sound pressure level 82 dB/W (1.0 m)
Frequency range 110 Hz to 22 kHz (-16 dB)
120 Hz to 20 kHz (-10 dB)
Dimensions (W x H x D) 270 mm x 92 mm x 95.4 mm
Mass 1.3 kg
Center speaker (SC-HT60: SB-PC41)
Type 1 Way, 2 Speaker, Bass-ref.
Speaker unit
Full range 6.5 cm cone type x 2, 6
Input power (IEC) 220 W (Max)
Output sound pressure level 85 dB/W (1.0 m)
Frequency range 95 Hz to 40 kHz (-16 dB)
110 Hz to 36 kHz (-10 dB)
Dimensions (W x H x D) 270 mm x 92 mm x 95.4 mm
Mass 1.2 kg
Passive subwoofer (SB-W40)
Type 1 Way, 1 Speaker, Bass-ref.
Speaker unit (Woofer) 16 cm cone type, 6
Input power (IEC) 220 W (Max)
Output sound pressure level 78 dB/W (1.0 m)
Frequency range 31 Hz to 500 Hz (-16 dB)
38 Hz to 400 Hz (-10 dB)
Dimensions (W x H x D) 182 mm x 392 mm x 266 mm
Mass 3.7 kg
g GENERAL
Power supply AC 230 to 240 V, 50 Hz
Power consumption 120 W
Dimensions (W x H x D) 430 mm x 105 mm x 385 mm
Mass 3.8 kg
Power consumption in standby mode: 1 W
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Digital input OPTICAL 2
COAXIAL
1
SC-HT40GN-offset.indb 23 2/27/2006 11:39:32 AM

Related product manuals