4
RQTC0047
Simple setup
Preparation
[HT623] (Front and surround speakers only)
Attach the rubber feet to prevent vibration causing the speakers to move or fall over.
Use 3 or 4 feet per speaker.
[HT888]
Front and surround speaker assembly
Preparation
≥To prevent damage or scratches, lay a soft cloth and perform assembly on it.
≥For assembly, use a Phillips-head screwdriver.
1 Reverse the speaker box.
2 Place the base on the bottom of the
speaker box.
3 Secure the base to the speaker box.
4 Reverse the assembled speaker.
Make sure you have all the indicated components before starting the assembly, setup, and
connection.
4 speaker boxes
4 bases
12 screws
STEP1
Bottom of the speaker
box
Top of the speaker box
3 holes in the base should be aligned
to those in the speaker.
Base
Rubber feet
Ensure the base is fastened
on straight by lightly tightening
the 3 screws alternately until
fully tightened.
Front and surround speaker assembly
RQT0047.book 4 ページ ２００４年８月４日 水曜日 午後５時４８分
To Next Page
Loading...
