5
RQTC0047
∫ Preventing the front and surround speakers from falling over
[Note]
Consult with a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not
have strong enough support. Improper attachment may result in damage to the wall or speakers.
Other speaker setup options
[HT888] (Center speaker only) [HT623]
∫ Attaching to a wall
1 Drive a screw (not included) into a wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
≥The wall or pillar on which the speakers are to be attached should be capable of
supporting 10 kg per screw. Consult a qualified building contractor when attaching the
speakers to a wall. Improper attachment may result in damage to the wall and speakers.
Approx. 150 mm
String (not included)
Screw eye (not included)
Wall
reparat
on
≥You will need to obtain the appropriate screw eyes to match the
walls to which the screw eyes are going to be fastened.
≥The walls should be capable of supporting 30 kg per screw.
Wall or pillar
e.g. Center speaker [HT888] [HT623]
200 mm
Front and surround speaker assembly/Other speaker setup options
RQT0047.book 5 ページ ２００４年８月４日 水曜日 午後５時４８分
To Next Page
Loading...
