RQT8804
16
Basic play
Basic play
To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).
≥ To change your television’s video input mode, refer to its operating instructions.
[Note[
≥ DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED. To preserve the unit’s motor and your television screen, press [∫] (Stop) when
you are finished with the menus.
≥ Total title number may not be displayed properly on iR/iRW.
≥ Multiple-channel signals are down-mixed to 2-channel stereo.
Using the main unit
ADVANCED
SURROUND
VOLUME
Press to skip.
Press and hold to
– search during play
– start slow-motion play during pause
(Motion picture part)
≥ Press [1] (Play) to start normal play.
6 Adjust the
volume.
5 Start play.
The tray is automatically closed.
To change the sound quality ➜ page 31
3 Open the disc tray.
∫ (Stop)
2 Select “DVD/CD”.
≥ Select “TV” or “AUX” to enjoy video
cassette recorder, television or cable
TV programs.
(Refer to page 11 for the necessary
connections.)
1 Turn the unit on.
4 Load the disc.
≥ Load double-sided discs so the label for the
side you want to play is facing up.
≥ For DVD-RAM, remove the
disc from its cartridge
before use.
ADVANCED SURROUND
(➜ page 31)
8804En_p16-29.fm Page 16 Thursday, June 29, 2006 1:40 PM
To Next Page
Loading...
Need help?
General
