VQT5J46
11
By using the Bluetooth
®
connection, you can listen to the sound from the Bluetooth
®
audio device from
this system wirelessly.
≥
Refer to the operating instructions of the Bluetooth
®
device for further instruction on how to connect a Bluetooth
®
device.
Preparation
≥Turn on the Bluetooth
®
feature of the device and place the device near the main unit.
Press [ ] to select “ ”.
≥ If the “ ” indicator flashes quickly, go to step 3.
Press and hold [ ] until the “ ” indicator flashes quickly.
≥ If the “ ” indicator flashes slowly, repeat step 2.
Select “SC-HTB18” from the Bluetooth
®
device’s Bluetooth
®
menu.
≥ If prompted for the passkey on the Bluetooth
®
device, enter “0000”.
≥ Once the Bluetooth
®
device is connected, the “ ” indicator stops flashing and lights up.
≥ You can register 8 or more Bluetooth
®
devices to this unit.
However, when this unit is turned off, it can store only up to 8 registered devices. If you register 9 or more devices,
devices with the oldest connection history will be deleted.
Press [ ] to select “ ”.
≥ If the “ ” indicator lights, a Bluetooth
®
device is already connected with this system. Disconnect it. (> below)
Select “SC-HTB18” from the Bluetooth
®
device’s Bluetooth
®
menu.
∫ Disconnecting a Bluetooth
®
device
Press and hold [ ] until the “ ” indicator flashes slowly.
≥
When “ ” is selected as the source, this system will automatically try and connect to the last connected Bluetooth
®
device.
If the connection attempt fails, try to establish a connection again.
≥ The Bluetooth
®
device will be disconnected if a different audio source (e.g. “TV”) is selected.
≥ This system can only be connected to one device at a time.
Bluetooth
®
connection
Bluetooth
®
pairing
Connecting a paired Bluetooth
®
device
SC-HTB18_EB_VQT5J46.book 11 ページ ２０１４年３月１９日 水曜日 午前９時４７分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
