EasyManuals Logo

Panasonic SC-HTB18 User Manual

Panasonic SC-HTB18
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
VQT5J46
Step 2 Placement
Do not hold the main unit in one hand to avoid injury, you may drop the main unit when carrying it.
To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
When carrying the subwoofer
To avoid interference, maintain the following distances between the main unit/subwoofer and
other electronic devices that use the same radio frequency (2.4 GHz band).
Safety Precautions
Professional installation is required.
The installation should never be done by any other than a qualified installation specialist.
PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING
DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING.
Be sure to install the main unit as indicated within this operating Instructions.
Attach using techniques suited to the structure and materials of the installation location.
Caution
This system is to be used only as indicated in these instructions. Failure to do so may lead to
damage to the amplifier and/or the speaker, and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you experience a sudden change in performance.
Do not attempt to attach the main unit to a wall using methods other than those described in this
manual.
The subwoofer
A Do not hold the subwoofer from this opening.
The parts inside may get damaged.
B Always hold the bottom of the subwoofer when
moving it.
Wireless interference
C Main unit/subwoofer
D Wireless router, cordless phone and
other electronic devices: approx. 2 m
A
B
D
C
SC-HTB18_EB_VQT5J46.book 12 ージ 014年3月19日 水曜日 午前9時47

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic SC-HTB18 and is the answer not in the manual?

Panasonic SC-HTB18 Specifications

General IconGeneral
Audio decoders-
RMS rated power120 W
Audio output channels2.1 channels
Subwoofer typeActive subwoofer
Subwoofer includedYes
Subwoofer locationSeparate
Subwoofer connectivityWireless
Receiver includedNo
Product colorBlack
Apple docking compatibilityNot supported
Subwoofer driver diameter (imperial)6.3 \
HDMI ports quantity0
AC input voltage220-240 V
AC input frequency50 Hz
Power consumption (standby)0.37 W
Power consumption (typical)35 W
Weight and Dimensions IconWeight and Dimensions
Depth65.5 mm
Width750 mm
Height118 mm
Soundbar weight2300 g
Subwoofer depth290 mm
Subwoofer width156 mm
Subwoofer height263 mm
Subwoofer weight3000 g

Related product manuals