Panasonic SC-HTB18 User Manual

8
VQT5J46
1 Turn the main unit on or off (> 17)
2 Turn the surround effect on or off (> 17)
3 Turn the clear voice effect on or off (> 17)
4 Select the TV as the source (> 17)
5 Select the BD/DVD as the source (> 17)
6 Adjust the output level of the subwoofer
(bass sound) (> 17)
7 Adjust the volume of this system (> 17)
8 Mute the sound (> 17)
9 Select the Bluetooth
®
device as the source
(> 17)
∫ About remote control signal sensor
The remote control signal sensor is located on the main unit.
≥Use the remote control within the correct operation range.
Distance: Within approx. 7 m directly in front
Angle: Approx. 30
o
left and right
B Remote control signal sensor
Remote control
SURROUND
CLEAR VOICE
BD/DVD TV
1
2
3
4
5
6
7
8
9
∫ Before using for the first time
Remove the insulation sheet A.
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)
≥ Set the button-type battery with its (i) mark
facing upward.



SC-HTB18_EB_VQT5J46.book 8 ページ ２０１４年３月１９日 水曜日 午前９時４７分

Panasonic SC-HTB18 Specifications

General

Audio decoders	-
RMS rated power	120 W
Audio output channels	2.1 channels
Subwoofer type	Active subwoofer
Subwoofer included	Yes
Subwoofer location	Separate
Subwoofer connectivity	Wireless
Receiver included	No
Product color	Black
Apple docking compatibility	Not supported
Subwoofer driver diameter (imperial)	6.3 \
HDMI ports quantity	0
AC input voltage	220-240 V
AC input frequency	50 Hz
Power consumption (standby)	0.37 W
Power consumption (typical)	35 W

Weight and Dimensions

Depth	65.5 mm
Width	750 mm
Height	118 mm
Soundbar weight	2300 g
Subwoofer depth	290 mm
Subwoofer width	156 mm
Subwoofer height	263 mm
Subwoofer weight	3000 g