To Next PageTo Next PageWhy is my Panasonic Home Theater System remote control not working?
If your Panasonic Home Theater System remote control isn't working, first remove the insulation sheet if it's the first time using it. Then, check if the battery is installed correctly. If the battery is weak, replace it with a new one and set the remote control code again. Finally, ensure you are using the remote control within the correct operation range.
How to troubleshoot no power on Panasonic SC-HTB490?
If your Panasonic Home Theater System has no power, first wait about 10 seconds after connecting the AC mains lead before switching on the main unit. If that doesn't work, disconnect the AC mains lead for 10 seconds and then reconnect it. If the unit switches off immediately after being turned on, disconnect the AC mains lead and consult your dealer. Also, if the unit doesn't switch on when you turn on the TV (HDMI CEC), try switching on the main unit manually.
How to fix no sound on Panasonic Home Theater System?
If your Panasonic Home Theater System has no sound, try the following: 1. Cancel muting. 2. Check the connections to the other devices. 3. Ensure the received audio signal is compatible with the system. 4. If connected to the TV with only an HDMI cable, and the HDMI terminal isn't labeled 'HDMI (ARC)', connect an optical digital audio cable. 5. If connections are correct, try changing the cables. 6. Check the audio output settings on the connected device. 7. Try changing the digital audio output setting on the connected device.
What to do if Panasonic Home Theater System device cannot be connected?
If your Panasonic Home Theater System is not connecting to a device, try the following: 1. Do pairing again, because the pairing of the device was unsuccessful. 2. Do pairing again, because the pairing of the device has been replaced. 3. Disconnect other devices, because the system might be connected to a different device and try connecting the device again. 4. Switch off the system and then switch on again, because the system may have a problem.
What to do if device is connected but audio cannot be heard through Panasonic SC-HTB490 Home Theater System?
If you cannot hear audio through your Panasonic Home Theater System even though the device is connected, for some built-in Bluetooth[®] devices, you have to set the audio output to 'SC-HTB490' manually. Consult the operating instructions of the device for specific instructions.
Why pairing cannot be done on Panasonic SC-HTB490?
If you are experiencing pairing issues with your Panasonic Home Theater System, check the Bluetooth[®] device condition. If the device is out of the 10 m communication range, move it nearer to the system.
Why is sound interrupted on Panasonic SC-HTB490 Home Theater System?
If the sound from your Panasonic Home Theater System is interrupted, move the device nearer to the system if it is out of the 10 m communication range. Also, remove any obstacles between the system and the device. If other devices using the 2.4 GHz frequency band are interfering, move the device nearer to the system and distance it from the other devices.
What to do if WIRELESS LINK indicator does not switch on Panasonic SC-HTB490 Home Theater System?
General| RMS rated power | 320 W |
|---|---|
| Audio output channels | 2.1 channels |
| Surround modes quantity | 2 |
| Wi-Fi | No |
| Bluetooth | Yes |
| Bluetooth version | 4.2 |
| Connectivity technology | Wireless |
| Soundbar speaker RMS power | 160 W |
| Power consumption (standby) | 0.5 W |
| Product color | Black |
| Cables included | AC |
| Number of products included | 7 pc(s) |
| Harmonized System (HS) code | 85182200 |
Weight and Dimensions| Depth | 100 mm |
|---|---|
| Width | 800 mm |
| Height | 56 mm |
| Soundbar weight | 8700 g |
| Subwoofer depth | 360 mm |
| Subwoofer width | 170 mm |
| Subwoofer height | 382 mm |
