To Next PageTo Next PageWhat to do if Panasonic Home Theater System remote control does not work?
If the remote control for your Panasonic Home Theater System isn't working properly, try these steps: - Replace the battery with a new one if it's depleted. - Remove the insulation sheet if it hasn't been removed yet. - Set the code of the remote control again if you changed the battery.
Why is there no sound or image on my Panasonic Home Theater System?
If you're experiencing no sound (or image) with your Panasonic Home Theater System, first ensure that muting is turned off. Check all connections to other devices and confirm that the received audio signal is compatible with the unit. Try turning the unit off and then on again. If connected to the TV with an HDMI cable, ensure the TV’s HDMI terminal is labeled “HDMI (ARC)”, if not, connect using the optical digital audio cable. Try reconnecting the unit with different cables and check the audio output settings on the connected device.
What to do if my Panasonic SC-HTB520 has no power?
If your Panasonic Home Theater System has no power, ensure the AC power supply cord is securely inserted. If, after turning the unit on, the indicators blink and the unit immediately turns off, unplug the AC power supply cord and consult your dealer.
Why is there no sound from the subwoofer of my Panasonic Home Theater System?
If there is no sound from the subwoofer of your Panasonic Home Theater System, check that the active subwoofer is turned on and that the wireless link indicator lights green.
How to fix distorted audio from TV on my Panasonic SC-HTB520?
If the audio from the TV is distorted when using your Panasonic Home Theater System, change the TV’s digital audio output settings to “Bitstream.”
How to fix no power on Panasonic Home Theater System?
If your Panasonic Home Theater System has no power, first, ensure the AC mains lead is securely inserted. If, after turning the unit on, the indicators blink and the unit immediately turns off, unplug the AC mains lead and consult your dealer.
Why does the volume lower when I turn on my Panasonic SC-HTB520?
If the volume on your Panasonic Home Theater System is lowered when you turn it on, it may be because the unit was turned off with the volume setting in the greater half (above 50). To turn off this function, press and hold [MUTE] on the remote control. The setting is changed when the D, DTS and PCM indicators blink. To reset the setting, return to the factory preset.
Why is the audio from the TV distorted on my Panasonic SC-HTB520 Home Theater System?
If the audio from the TV is distorted on your Panasonic Home Theater System, change the TV’s digital audio output settings to 'Bitstream'.
What does it mean when the wireless link indicator lights red on my Panasonic SC-HTB520 Home Theater System?
If the wireless link indicator lights red on your Panasonic Home Theater System, there is no link between the main unit and the active subwoofer. Ensure that the main unit is turned on, that the digital transmitter is fully inserted into the digital transmitter dock on the main unit. Also, try turning the active subwoofer off and then back on, or disconnecting and reconnecting its AC mains lead.
General| Audio decoders | Dolby Digital, DTS |
|---|---|
| RMS rated power | 240 W |
| Audio output channels | 2.1 channels |
| Audio Return Channel (ARC) | Yes |
| Impedance | 4 Ω |
| Woofer diameter | 65 mm |
| Tweeter diameter | 25 mm |
| Soundbar speaker RMS power | 120 W |
| Woofer diameter (imperial) | 2.5 \ |
| Tweeter diameter (imperial) | 1 \ |
| Total Harmonic Distortion (THD) | 10 % |
| Subwoofer location | Separate |
| Subwoofer connectivity | Wireless |
| Receiver included | No |
| Product color | Black |
| Consumer Electronics Control (CEC) | VIERA Link |
| Apple docking compatibility | Not supported |
| Soundbar dimensions (WxDxH) | 1018 x 44 x 75 mm |
| Subwoofer dimensions (WxDxH) | 180 x 306 x 408 mm |
| Subwoofer driver diameter (imperial) | 6.5 \ |
| HDMI in | 1 |
| Connectivity technology | Wired |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.6 W |
| Power consumption (typical) | 30 W |
Weight and Dimensions| Soundbar weight | 2500 g |
|---|---|
| Subwoofer weight | 5200 g |
Guidance on where to position the unit for optimal performance and safety.
Detailed instructions and safety precautions for mounting the unit on a wall.
Instructions for placing the unit in a rack or on a table, including fall prevention.
How to connect the unit to a television via HDMI or optical audio cables.
Connecting HDMI compatible devices like Blu-ray players or DVD players.
Solutions for common problems, factory reset, and HDMI connectivity issues.
Power consumption, dimensions, speaker details, and connectivity specs.
