EasyManuals Logo

Panasonic SC-HTB520 User Manual

Panasonic SC-HTB520
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Reference
25
No power.
Ensure the AC mains lead of the active subwoofer
is connected properly.
After turning the subwoofer on, it immediately
turns off.
Unplug the AC mains lead and consult your dealer.
No sound from the subwoofer.
Check that the active subwoofer is turned on.
Check that the wireless link indicator lights green.
(> 19)
The wireless link indicator lights red.
There is no link between this unit and the active
subwoofer.
jCheck that this unit is turned on.
jEnsure that the digital transmitter is fully inserted
into the digital transmitter dock on this unit.
(> 17)
jTurn the active subwoofer off and then back on.
Alternatively, turn the active subwoofer off,
disconnect the AC mains lead and then reconnect
it.
Consult your dealer if the problem persists.
The audio from the subwoofer is interrupted.
The active subwoofer is automatically seeking a
clear channel. If the interference persists, try
moving the other wireless devices to another
location outside the range of the active subwoofer
or move the active subwoofer nearer to this unit.
(> 10)
The wireless link indicator lights red and green
alternately.
Turn the subwoofer off, disconnect the AC supply
cord and then reconnect it.
Consult your dealer if the problem persists.
When other Panasonic products respond to this
unit’s remote control, change the remote control
code on this unit and the remote control.
Preparation
Turn off all other Panasonic products.
Turn on this unit.
Change the remote control to code 2:
1 Aim the remote control at this unit’s remote
control sensor.
2 Press and hold [MUTE] and [BD/DVD] on the
remote control for more than 4 sec.
A will blink for 10 sec when the code of this unit is
changed.
If the unit does not operate after changing the code, repeat
steps 1 and 2.
To change the remote control to code 1, repeat the steps
above, but replace [BD/DVD] with [TV].
Audio information
Compatible audio formats
This unit is compatible with the following formats:
Dolby Digital, DTS Digital Surround, 2-channel
LPCM and multi-channel LPCM.
Active subwoofer
Remote control code
TV
BD/DVD
DTS PCMD
A
SC-HTB520EGEBGNGS_RQTX1279-B.book Page 25 Tuesday, February 22, 2011 9:05 AM

Other manuals for Panasonic SC-HTB520

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic SC-HTB520 and is the answer not in the manual?

Panasonic SC-HTB520 Specifications

General IconGeneral
Audio decodersDolby Digital, DTS
RMS rated power240 W
Audio output channels2.1 channels
Audio Return Channel (ARC)Yes
Impedance4 Ω
Woofer diameter65 mm
Tweeter diameter25 mm
Soundbar speaker RMS power120 W
Woofer diameter (imperial)2.5 \
Tweeter diameter (imperial)1 \
Total Harmonic Distortion (THD)10 %
Subwoofer locationSeparate
Subwoofer connectivityWireless
Receiver includedNo
Product colorBlack
Consumer Electronics Control (CEC)VIERA Link
Apple docking compatibilityNot supported
Soundbar dimensions (WxDxH)1018 x 44 x 75 mm
Subwoofer dimensions (WxDxH)180 x 306 x 408 mm
Subwoofer driver diameter (imperial)6.5 \
HDMI in1
Connectivity technologyWired
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.6 W
Power consumption (typical)30 W
Weight and Dimensions IconWeight and Dimensions
Soundbar weight2500 g
Subwoofer weight5200 g

Related product manuals