EasyManuals Logo

Panasonic SC-HTB520 User Manual

Panasonic SC-HTB520
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Getting started
17
You can output the audio signal from the connected HDMI compatible Blu-ray player, DVD player, etc. with
this unit and pass the signal through to your TV.
Preparation
Connect this unit to the TV. (> 16)
A E.g., Blu-ray Disc Player B HDMI cable (not supplied)
Refer to the Operating Instructions of the connected HDMI compatible device for the necessary setting, to output the
video and audio signals.
A Digital transmitter (supplied)
Insert the digital transmitter, with the label facing down, until you hear a click.
Connection from an HDMI compatible device
HDMI AV IN
HDMI OUT
3D compatibility
Compatible with FULL HD 3D TV and Blu-ray Player
This unit can pass through the 3D signal from a 3D compatible Blu-ray Player to a FULL HD 3D TV.
x.v.Colour
TM
compatibility
You can enjoy vivid colour of a wider colour ranges for a more realistic picture when this unit is connected to a player and
TV that support x.v.Colour
TM
with an HDMI cable.
Deep Colour compatibility
When this unit is connected to a compatible player, this unit can pass through the reproduced greater colour gradation
(4096 steps) when connected to a compatible TV. You can enjoy exceptionally rich, natural-looking colours, with smooth,
detailed gradation and minimal colour banding.
Digital transmitter connection
Do not insert or remove while this unit is on.
DIGITALTRANSMITTER
SC-HTB520EGEBGNGS_RQTX1279-B.book Page 17 Tuesday, February 22, 2011 9:05 AM

Other manuals for Panasonic SC-HTB520

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic SC-HTB520 and is the answer not in the manual?

Panasonic SC-HTB520 Specifications

General IconGeneral
Audio decodersDolby Digital, DTS
RMS rated power240 W
Audio output channels2.1 channels
Audio Return Channel (ARC)Yes
Impedance4 Ω
Woofer diameter65 mm
Tweeter diameter25 mm
Soundbar speaker RMS power120 W
Woofer diameter (imperial)2.5 \
Tweeter diameter (imperial)1 \
Total Harmonic Distortion (THD)10 %
Subwoofer locationSeparate
Subwoofer connectivityWireless
Receiver includedNo
Product colorBlack
Consumer Electronics Control (CEC)VIERA Link
Apple docking compatibilityNot supported
Soundbar dimensions (WxDxH)1018 x 44 x 75 mm
Subwoofer dimensions (WxDxH)180 x 306 x 408 mm
Subwoofer driver diameter (imperial)6.5 \
HDMI in1
Connectivity technologyWired
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.6 W
Power consumption (typical)30 W
Weight and Dimensions IconWeight and Dimensions
Soundbar weight2500 g
Subwoofer weight5200 g

Related product manuals