10. Select the subwoofer setting
11. USB and Bluetooth® playback control
Play Press [ ].
Pause Press [ ]. Press again to continue playback.
Skip Press
Blutooth®
Preparation
Switch on the Bluetooth® feature of the device and put the device near the system.
Pairing a device
1. Press and hold [ -PAIRING] until Indicator A blinks fast in blue.
2. Select “SC-HTB490” from the Bluetooth® menu of the device.
‘Connecting a paired device
1. Press [ -PAIRING].
2. Select “SC-HTB490” from the Bluetooth menu of the device.
3. Start playback on the device.
Note:
When a sound interruption occurs during use with a wireless TV:
Change the N to use the 5 GHz wireless range, or
Adjust the main unit to a position with the least interference, such as put it in front of the N instead of below the
N.
Connecting a USB device
To Next Page
Loading...
