RQT9785
23
You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to
this system.
Preparation
≥Connect the main unit to the TV (> 22).
A HDMI cable B Optical digital audio cable
≥ Refer to the operating instructions of the connected HDMI compatible device for the necessary setting, to output the video
and audio signals.
Connection with other devices
HDMI OUT
OPTICAL
OUT
AV IN
BD/DVD
AV IN
BD/DVD
DIGITAL
AUDIO
IN
e.g., Set top box
e.g., Blu-ray Disc player
∫ HDMI standby pass-through
Even if the main unit is in standby mode, the audio and/or video signal from the device connected to the HDMI IN terminal will
be sent to the TV connected to the HDMI OUT terminal (the sound will not be output from this system).
∫ 3D compatibility
Compatible with FULL HD 3D TV and Blu-ray Disc player.
≥ The main unit can pass-through the 3D video signal from a 3D compatible Blu-ray Disc player to a FULL HD 3D TV.
SC-HTB570_RQT9785-B_mst.book 23 ページ ２０１３年１月１０日 木曜日 午後２時５６分
To Next Page
Loading...
