Panasonic SC-HTB900 User Manual

22
TQBM0479
∫ WALL MOUNT
Select the appropriate speaker placement mode
to suit your placement method. This system will
adjust the sound effect according to the
placement mode setting.
ON: For wall mounting layout
OFF: For table top layout

≥ Changed settings will be kept until it is changed again,
unless otherwise indicated.
*1 The “SOUND MODE” cannot be set to “STRAIGHT” at
the same time that “3D SURROUND” is set to “ON”, and
vice versa.
*2 Effects are disabled when the input selected is
“BLUETOOTH” or “NETWORK”. It is also not possible to
change the settings.
You can view the current audio format.
Press and hold [SOUND] for more than 4 sec.

≥ The audio format is displayed for about 3 seconds.
≥ No audio format is displayed if input to this unit is
Bluetooth
®
or the network.
Setup menu
1 Press [SETUP] repeatedly to select
the setup item and then press [OK].
≥ You can also press [4] or [3] repeatedly to select the
setup item.
2 Press [4][3] repeatedly to select the
desired setting and then press [OK].
∫ DIMMER
Switch the brightness of the display.
≥ While “DISPLAY OFF” is set, the display lights for about
5 seconds if operations are performed on the main unit or
with the remote control.
≥ While “DISPLAY OFF” is set, a part of the display lights if
the display is off but the main unit is on.
∫ BEEP
A beep sounds when you touch the switch on the
main unit or when you turn the unit on/off.
≥ This works during muting as well.
∫ AUTO OFF
The main unit automatically is turned off if there is
no audio input and when you do not use it for
approx. 20 minutes.
≥ When this is set, the display shows “P.OFF 1MIN” to
indicate that the main unit will turn off in approximately 1
minute.
≥ If “STANDBY MODE” or “VIERA LINK” is set to “ON”, this
function will also be set to “ON”. To change the setting, set
“STANDBY MODE” and “VIERA LINK” to “OFF”. ( 23)
∫ VOL LIMITATION
When this function is set to “ON”, if the volume
exceeds 50 when the main unit is turned off, then
the volume is set to 50 when the main unit is
turned on.
∫ LINK MODE
Change the Bluetooth
®
transmission mode to
prioritise transmission quality or sound quality.
Make sure that the Bluetooth
®
device is not
connected (“BLUETOOTH READY” is indicated
on the display).
MODE 1: Emphasis on connectivity.
MODE 2: Emphasis on sound quality.
≥ The default setting is “MODE 2”.
Audio format
SC-HTB900-EGEBGN-TQBM0479_eng.book 22 ページ ２０１９年４月１６日 火曜日 午後７時５８分

Panasonic SC-HTB900 Specifications

General

Game mode	Yes
RMS rated power	505 W
Audio output channels	3.1 channels
Wi-Fi	-
Bluetooth version	4.2
HDMI ports quantity	3
Connectivity technology	Wired
Impedance	4 Ω
Soundbar speaker RMS power	85 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Soundbar power consumption	40 W
Power consumption (standby)	0.3 W
Product color	Black

Weight and Dimensions

Depth	129 mm
Width	1050 mm
Height	78 mm
Soundbar weight	6000 g
Subwoofer depth	306 mm
Subwoofer width	180 mm
Subwoofer height	408 mm
Subwoofer weight	5400 g