Panasonic SC-HTE200

24
SQT0858
Specifications

≥ Specifications are subject to change without notice.
≥ Mass and dimensions are approximate.
≥ Total harmonic distortion is measured by a digital
spectrum analyzer.
§ 1 “Network Standby” means both
“BLUETOOTH SATNDBY” and “VIERA LINK”.
§ 2 Prospect communication distance.
Measurement environment.
(Temperature 25
o
C, Height 1.0 m)
AMPLIFIER SECTION
RMS output power (non-simultaneous drive)
Front ch (L, R ch)
50 W per channel (1 kHz, 10 %, 6 ≠)
Subwoofer ch
100 W per channel (100 Hz, 10 %, 3 ≠)
Total RMS output power
200 W
TERMINAL SECTION
HDAVI Control
This unit supports “HDAVI Control 5” function.
HDMI AV input (BD/DVD)
1
Input connector
Type A (19 pin)
HDMI AV output (TV (ARC))
1
Output connector
Type A (19 pin)
Digital audio input (TV)
Optical digital input
Optical terminal
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
88.2 kHz, 96 kHz (only LPCM)
Audio format
LPCM, Dolby Digital, DTS Digital Surround
TM
USB Port
For service use only.
Analog audio input
Audio input
Terminal type, Pin jack (1 system)
GENERAL
Power consumption
54 W
In standby condition
When “Network Standby”
§1
is “OFF”
Approx. 0.4 W
When “Network Standby”
§1
is “ON”
Approx. 3.0 W
Power supply
AC 220 V to 240 V, 50 Hz
Dimensions (WkHkD)
600 mmk63 mmk365 mm
Mass
Approx. 5.9 kg
Operating temperature range
0
o
C to i40
o
C
Operating humidity range
20 % to 80 % RH (no condensation)
SPEAKER SECTION
Front speakers (Built-in, L/R)
Full range
3.8 cmk 9 cm cone type k 1/ch
(Bass reflex type)
Subwoofers (Built-in)
woofer
8 cm cone type k 2
(Bass reflex type)
Bluetooth
®
SECTION
Bluetooth
®
system specification
Bluetooth
®
Ver.2.1 +EDR
Wireless equipment classification
Class 2 (2.5 mW)
Supported profiles
A2DP
Frequency band
2.4 GHz band FH-SS
Operating distance
Approx. 10 m Line of Sight
§2
Supported codec
SBC
SC-HTE200-SQTxxxx.book 24 ページ ２０１５年４月２７日 月曜日 午前１０時２分