SQT0858
7
1[Í] Turn the main unit on or off (> 15)
2 [INPUT] Select the input source (> 15)
3 [SETUP] Select the setup menu (> 18)
4 [SOUND] Select the sound menu
(> 16, 17)
5 [ -PAIRING]
≥ Select the Bluetooth
®
device as the
source (> 15)
≥ Bluetooth
®
pairing (> 13)
≥ Disconnecting a Bluetooth
®
device (> 13)
6[j VOL i] Adjust the volume of this system
(> 15)
7 [MUTE] Mute the sound (> 15)
8[4][OK][3] Select and confirm the option
∫ Before using for the first time
Remove the insulation sheet A.
≥ Dispose of the insulation sheet responsibly
after removing it.
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)
≥ Set the button-type battery with its (i) mark
facing upward.
∫ About remote control signal sensor
The remote control signal sensor is located
on the main unit.
≥ Use the remote control within the correct
operation range.
Distance: Within approx. 7 m directly in front
Angle: Approx. 30
o
left and right
B Remote control signal sensor
Remote control
SOUND
1
5
6
7
8
2
INPUT
SETUP
OK
3
4
SC-HTE200-SQTxxxx.book 7 ページ ２０１５年４月２７日 月曜日 午前１０時２分
To Next Page
Loading...
