ENGLISH
RQTX0190
16
Preparation
Ensure disc tray is empty.
Press and hold [CD q/h] on the main unit and then
press and hold [2] (or [1]) on the remote control.
“REMOTE 2” (or “REMOTE 1”) is displayed.
Devices which are defined as USB mass storage
class:
USB devices that support bulk only transfer.
USB devices that support USB 2.0 full speed.
•
•
Files must have the extension “.mp3” or “.MP3”.
The USB connectivity enables you to connect and play
MP3 tracks from USB mass storage class. Typically,
USB memory devices. (Bulk only transfer)
Preparation
Before connecting any USB mass storage device to
the unit, ensure that the data stored therein has been
backed up.
It is not recommended to use a USB extension
cable. The device connected via the cable will not be
recognised by this unit.
1 Reduce the volume and connect the USB mass
storage device.
2 Press [USB q/h] or [OK] to start play.
To Action
pause play
Press [USB q/h].
Press again to resume play.
stop play
Press [g].
“RESUME” is displayed. The position is
memorized.
Press [USB q/h] to resume.
Press [g] again to clear the position.
skip track
Press [w, q].
skip album
Press [e,r] in the play mode.
Press [e,r] once and then the numeric
buttons in the stop mode.
DEMO
VOLUME
VOLUME
OPEN/CLOSE
D.BASS
BASS
TREBLE
_
+
/
iPod
/
USB
/
CD
DAB/FM
USB enabled device
(not included)
CBI (Control/Bulk/Interrupt) is not supported.
A device using NTFS file system is not supported
[Only FAT12/16/32 (File Allocation Table 12/16/32) file
system is supported].
Depending on the sector size, some files may not
work.
This unit can access up to 255 albums (including blank
folders) and 2500 tracks.
The maximum number of tracks in a folder are 999
tracks.
Only one memory card will be selected when
connecting a multiport USB card reader. Typically the
first memory card inserted.
Do not unplug the USB device during reading or
playback.
Disconnect the USB card reader from the unit when
you remove the memory card. Failure to do so may
cause malfunction to the device.
When you connect a compatible digital audio player
to the USB port, charging may be activated. It will not
charge when the unit is switched to standby mode or
iPod mode.
•
•
•
•
•
•
•
•
•
Press [DISPLAY] repeatedly during play or pause
mode.
Press and hold [OK] and [2] (or [1]) on the remote
control for at least 2 seconds.
If the remote control and main unit are using different
codes, a message appears on the main unit’s display
showing the main unit’s current code. Follow the above
step to change the remote control’s code to match it.
Change the code if you find the remote control
unintentionally also controls other equipment.
USB mass storage class device
Changing the remote control code
Change the main unit’s code
Change the remote control’s code
Compatible devices
Supported format
For other operating functions, they are similar to those
described in “Discs” (➡ page 7 and 8).
Note
Display function
Using other equipment (continued)
Elapsed play
time
Folder
name
Track
name
ID3 (Artist) ID3 (Track) ID3 (Album)
Remaining
play time
SC-PM42DBEB.indb 16 1/6/2010 10:14:58 AM
To Next Page
Loading...
Need help?
General
