ENGLISH
RQTX0190
8
Using DualDisc
The “CD” sides of DualDisc do not meet the CD-DA
standard so it may not be possible to play them on this
unit.
Files are treated as tracks and folders are treated as
albums.
This unit can access up to 999 tracks, 255 albums and
20 sessions.
Files must have the extension: “.MP3” or “.mp3”
Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
To play in a certain order, prefix the folder and file
names with the 3-digit numbers in the order you want
to play them.
•
•
•
•
This function allows you to display the information of the
current track.
Press [DISPLAY] repeatedly during play or pause
mode.
Maximum number of displayable characters:
approximately 30
This unit supports ver. 1.0 & 1.1 ID3 tags. Text data
that is not supported will not be displayed.
ID3 is a tag embedded in MP3 tracks to provide
information about the track.
•
•
•
This function allows you to program up to 24 tracks.
When you try to program more than 24 tracks
“PGM FULL” appears.
The program memory is cleared when you open the
disc tray.
•
•
Advanced play
Program play
Display function
Repeat play
MP3
Note
To cancel
Press [REPEAT] again.
“OFF REPEAT” is displayed and “ ” is cleared.
&
You can repeat program play or other selected play
mode.
CD
MP3
1 Press [CD q/h] and then [g].
2 Press [PROGRAM].
3 Press the numeric buttons to select your desired
track.
Repeat this step to program other tracks.
4 Press [CD q/h] to start play.
CD
1 Press [CD q/h] and then [g].
2 Press [PROGRAM].
3 Press [e,r] to select your desired album.
4 Press [u/t] or [y/i] once and then the
numeric buttons to select your desired track.
5 Press [OK].
Repeat steps 3 to 5 to program other tracks.
6 Press [CD q/h] to start play.
MP3
To Action
cancel program
mode
Press [PROGRAM] in the stop
mode.
replay the program
P
ress [PROGRAM] then [CD q/h]
.
check program
contents
Press [u/t] or [y/i]
when “PGM” is displayed in the
stop mode.
To check while programming,
press [PROGRAM] twice after
“PGM” appears, then press
[u/t] or [y/i].
add to the
program
Repeat step 3 in the stop mode.
Repeat steps 3 to 5 in the stop
mode.
clear the last track Press [DEL] in the stop mode.
clear all
programmed
tracks
Press [g] in the stop mode.
“CLR ALL” is displayed. Within 5
seconds, press the button again
to clear all tracks.
CD
MP3
During program play, you can search backward or
forward only within the current track.
•
CD
Note
Note
This unit can play MP3 files and CD-DA format audio
CD-R/RW that have been finalised.
This unit can access up to 99 tracks.
It may not be able to play some CD-R/RW depending
on the condition of the recording.
Do not use irregularly shaped discs.
Do not use discs with labels and stickers that are
coming off or with adhesive exuding from under labels
and stickers.
Do not attach extra labels or stickers on the disc.
Do not write anything on the disc.
•
•
•
•
•
•
CD
MP3
Press [REPEAT] before or during play.
“ON REPEAT” and “ ” are displayed.
&
Discs (continued)
Elapsed play
time
Folder
name
Track
name
ID3 (Artist) ID3 (Track) ID3 (Album)
CD
Elapsed play time Remaining
play time
SC-PM42DBEB.indb 8 1/6/2010 10:14:25 AM
To Next Page
Loading...
Need help?
General
