EasyManua.ls Logo

Panasonic SC-PM5DB - Using the FM Radio

Panasonic SC-PM5DB
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RQTX0237
11
Using the FM radio
Manual tuning
Manual tuning
1
Press [DAB/FM] to select “FM”.
2 Press [TUNE MODE] to select “MANUAL”.
3 Press [4/1] or [¡/¢] to select the
frequency of the required station.
To tune automatically
Press [4/1] or [¡/¢] for a moment until the
frequency starts changing rapidly. The unit begins
auto tuning, stopping when it fi nds a station.
• Auto tuning may not function when there is
excessive interference.
• To cancel auto tuning, press
[4/1] or [¡/¢]
once again.
To improve FM sound quality
To improve FM sound quality
Press and hold [PLAY MODE] to display
“MONO”.
To cancel
Press and hold [PLAY MODE] again until
“MONO” disappears.
• MONO is also cancelled if the frequency is
changed.
• Turn off “MONO” for normal listening.
Memory preset
Memory preset
30 FM stations can be preset.
Preparation
Press [DAB/FM] to select “FM”.
Automatic presetting
Automatic presetting
1 Press [PLAY MODE] repeatedly to select
either “CURRENT” or “LOWEST”.
CURRENT Tuning begins from the current
frequency.
LOWEST Tuning begins from the lowest
frequency.
2 Press [AUTO PRESET] to start presetting.
The tuner presets all the stations it can receive into
the channels in ascending order. When fi nished, the
last station memorised is tuned in.
Manual presetting
Manual presetting
1 Press [TUNE MODE] to select “MANUAL”.
2 Press [4/1] or [¡/¢] to tune to the
required station.
3 Press [PROGRAM].
4 Press the numeric buttons to select a
channel.
The station occupying a channel is erased if
another station is preset in that channel.
5 Repeat steps 2 to 4 to preset more
stations.
Selecting a preset station
Selecting a preset station
Press the numeric buttons to select the
channel.
For channels 10 to 30 press [
h
10], then the two
digits.
OR
1 Press [TUNE MODE] to select “PRESET”.
2 Press [4/1] or [¡/¢] to select the
channel.
RQTX0237-B_En.indd 11RQTX0237-B_En.indd 11 3/19/09 4:13:10 PM3/19/09 4:13:10 PM

Related product manuals