Panasonic SC-UA7E

14
6 Service Mode
6.1. Self Diagnostic Mode
Step 1 : Enter service mode
Press [DISPLAY] on the
remote control.
To carry out cold-start or initialize
to shipping mode
Select [ ] and [>] on
main set for 2 seconds.
When [SERVICE? ]
appear, press [SELECT]
on main set to confirm.
In service mode,
Press [OK] on main
unit for more than 5
seconds.
In service mode, press
[SETUP] on remote
control.
When “AC OUT” appear,
unplug AC power cord.
Plug in AC power cord.
Step 2 :
Step 1 :
Step 1 :
Step 2 :
Step 1 :
Step 3 :