FL Display
Key Operation
Front Key
Item
DescriptionMode Name
Doctor Mode
To enter into Doctor Mode for
checking of various items and
displaying EEPROM check sum
and Opecon firmware version.
Note: The Opecon firmware
version as shown is an example.
It will be revised when there is
updates.
FM, USB or Bluetooth Mode:nI
1. Press [ ] button on
main unit follow by [4]
and [7] on remote control.
2. To cancel this mode, press
[0] button on the remote
control or press
[ ] button on Main Unit.
Displaying of
1. Year Develop.
2. Model Type.
3. ROM Type.
4. Firmware Version.
5. SDK Version.
(Display 1)
(Display 3)
(Display 2)
Cold Start
To active cold start upon next AC
power up when reset start is
execute the next time.
In Doctor Mode:
1. Press [4] button on the
remote control.
(Decimal)
1 2 3 4
2. To cancel this mode, press
[0] button on the remote
control or press
5
Volume Setting
Check
To check the volume setting of the
main unit.
In Doctor Mode:
1. Press [7], [8], [9] button on
the remote control.
Press [7]: VOL50
Press [8]: VOL35
Press [9]: VOL0
Volume
FL Display
Check
To check the FL segment display.
All segments will light up while all
LED blink at 0.5s intervals.
In Doctor mode:
1. Press [1] button on the
remote control.
2. To cancel this mode, press
[0] button on the remote
control.
[ ] button on Main Unit.