Panasonic SC-UA7E

31
8.15. Disassembly of DAMP P.C.B.
• Refer to “Disassembly of Rear Panel”.
• Refer to “Disassembly of Top Panel Unit”.
• Refer to “Disassembly of Left & Right Side Panel
Assembly”.
• Refer to “Disassembly of Main P.C.B.”.
Step 1 Remove 6 screws on Main chassis.
Step 2 Cut 2 Cable Ties.
Step 3 Press to release and remove the Main chassis.
Step 4 Detach 4P Cable at connector (CN3501) on DAMP
P. C .B ..
Step 5 Detach 4P Cable at connector (CN3502) on DAMP
P. C .B ..
Step 6 Detach 2P Cable at connector (CN2101) on DAMP
P. C .B ..
Step 7 Detach 13P Cable at connector (CN2103) on DAMP
P. C .B ..
Step 8 Remove 4 screws.
Step 9 Remove DAMP P.C.B..