44
VQT3E42
You may switch the audio recording method
for motion picture recording on the SD Card.
¬ / Select
[VIDEO]/[SD CARD] in
[MEDIA SELECT].
Select the menu. (l 27)
[DOLBY] (Dolby Digital):
This is a recording method suitable for
creating a DVD-Video disc using the DVD
burner. (l 79)
[MPEG] (MPEG-1 Audio Layer 2):
This is a recording method suitable for
playing back the SD card using a device
conforming to the SD-Video standard.
≥ This function’s default setting is [DOLBY].
≥ This unit is not capable of converting the
audio recording method after recording
motion pictures.
By using the supplied software (VideoCam
Suite 3.5), audio can be recorded in
[DOLBY] mode on a DVD-Video disc and
in [MPEG] mode on an SD card.
Message is displayed when this unit is
moved rapidly.
Select the menu. (l 27)
When “CAMERA PANNING IS TOO FAST.”
appears, move the unit slowly while
recording.
≥ Message will not appear while pausing the
recording. (Message will appear even if it
is pausing the recording if [DEMO MODE]
is set to [ON].)
≥ In some recording conditions, messages
may not appear.
Audio recording modes
[SETUP] # [AUDIO REC] # [DOLBY]
or [MPEG]
Shooting guide
[RECORD SETUP] # [SHOOTING
GUIDE] # [ON]
SDR-H100&S71&S70&T70-VQT3E42_eng.book 44 ページ ２０１０年１１月２９日 月曜日 午後６時２１分
To Next Page
Loading...
