73
VQT3E42
Playback
Editing
3
DPOF setting
You can write the data selecting still pictures to be printed and the number of prints (DPOF
data) onto the SD card.
¬ Change the mode to , and switch play mode selection to [SD CARD]/
[PICTURE] (l 67)
1 Select the menu. (l 27)
2 Select the still picture to be
set, then press the joystick.
3 Select the number of prints,
then press the joystick.
≥ Up to 999 prints can be selected. (Prints
for set number can be printed with a
printer that supports DPOF.)
≥ To cancel the setting, set the number of
prints to [0].
≥ To continuously set other still pictures,
repeat steps 2-3.
≥ Press the MENU button to complete the
settings.
To cancel all DPOF settings
∫ What is DPOF?
DPOF (Digital Print Order Format) is a
format which allows the user of a digital
camera to define which captured images on
the SD card are to be printed, together with
information on the number of copies they
wish to print. (Please note: Not all
commercial printing services support this
feature at this time.)
≥ DPOF setting is not possible during disc
playback while connected to a DVD
burner.
≥ You cannot add the recording date to
pictures to be printed with the DPOF
settings.
/
≥ Copy still pictures saved in the built-in
memory or HDD to an SD card before
setting DPOF.
[PICT. SETUP] # [DPOF SET] # [SET]
[DPOF SET] # [CANCEL ALL]
SDR-H100&S71&S70&T70-VQT3E42_eng.book 73 ページ ２０１０年１１月２９日 月曜日 午後６時２１分
To Next Page
Loading...
