99
VQT3E42
With a PC
Using with a PC
2
If using Mac
≥ VideoCam Suite 3.5 is not available for Mac.
≥ SDXC memory cards cannot be used on Mac.
≥ iMovie’11 supported. For details about iMovie’11, please contact Apple Inc.
∫ Operating environment
≥ Even if the system requirements mentioned in this owner’s manual are fulfilled, some PCs
cannot be used.
≥ The USB equipment operates with the driver installed as standard in the OS.
≥ Supplied CD-ROM is available for Windows only.
∫ Copying still pictures on PC
1 Connect this unit to a PC via the supplied USB cable.
≥ The USB function selection screen will appear.
2 Use the joystick to select [PC], then press the center of the joystick.
≥ This unit is automatically recognized as an external drive of Mac.
≥ When you select an option other than [PC], reconnect the USB cable.
≥ When using the battery, the LCD monitor will be turned off after about 5 seconds.
Operating the joystick will cause the LCD monitor to turn on again.
3 Double-click [CAM_SD] displayed on the desktop.
≥
[CAM_SD] and [CAM_MEM] are displayed on the desktop.
≥
[CAM_SD] and [CAM_HDD] are displayed on the desktop.
≥ Files are stored in [100CDPFQ] or [101CDPFS] folder etc. in the [DCIM] folder.
4
Using a drag-and-drop operation, move the pictures you want to acquire
or the folder storing those pictures to any different folder on the PC.
∫ To disconnect USB cable safely
Drag [CAM_SD] disk icon to the [Trash], and then disconnect the USB cable.
≥
[CAM_SD] and [CAM_MEM] are displayed on the desktop.
≥
[CAM_SD] and [CAM_HDD] are displayed on the desktop.
PC Mac
OS Mac OS X 10.6.3
CPU Intel Core Duo or better
RAM 1 GB or more
Interface USB port
SDR-H100&S71&S70&T70-VQT3E42_eng.book 99 ページ ２０１０年１１月２９日 月曜日 午後６時２１分
To Next Page
Loading...
