20
LSQT1473
Preparation
Before using
4
Inserting/removing an SD
card
Caution:
If the SD card is inserted or removed while the power is on, this unit may malfunction or the data
recorded on the SD card may be lost.
1 Rotate the mode dial to OFF.
≥ Check that the status indicator has gone off.
2 Open the LCD monitor and then open the SD card slot cover.
3 Insert/remove the SD card.
≥ Press the SD card straight in as far as it will go.
≥ Press the centre of the SD card and then pull it straight out.
4 Securely close the SD card slot cover.
SDR-H90&80EB-LSQT1473_mst.book 20 ページ ２００９年１月２７日 火曜日 午前１１時４８分
To Next Page
Loading...
