77
LSQT1473
Playback
With other
products
3
With other video devices
[HDD] [SD]
You can create a playlist by gathering the scenes
on the HDD that you want to dub, then dub only
the scenes in this playlist to other devices.
(l 60)
≥ Use the AC adaptor to free you from worrying
about the battery running down.
1 Connect this unit to a video
device.
2 Turn on this unit, then rotate the
mode dial to select .
3 Select the playback medium by
the menu. (l 22)
4 Start playback on this unit.
Then start recording on the
connected device.
To stop dubbing
Stop recording on the connected device.
Then stop playback on this unit.
∫ Using SD card slot or USB
terminal of other video devices
If you have a DVD recorder with an SD card slot
or a USB terminal, images recorded by this unit
can be dubbed onto the hard disk or a DVD disc.
Refer to the operating instructions of your DVD
recorder for information about whether or not it
supports dubbing from an SD card or a USB
terminal.
When using a USB terminal
Connect this unit to a DVD recorder with the USB
cable (supplied), then select [PC/RECORDER]
on the USB function selection screen.
≥ For details on how to dub the images, refer to
the operating instructions of the DVD recorder.
Dubbing images onto other
video devices
A AV cable (supplied)
≥ Insert the plugs as far as they will go.
≥ Do not use any other AV cables except
the supplied one.
≥ If your video device is not equipped
with AV Input Sockets, the 21-pin
Adaptor B (purchase separately) is
necessary. Consult your dealer.
≥ Select the video input on the video
device and TV that this unit and the
video device are connected to.
[MEDIA SELECT] # [HDD] or
[SD CARD]
If you dub images and then play them back on
a wide-screen TV, they may be squeezed
horizontally. In this case, refer to the operating
instructions of the device you are dubbing to
or read the operating instructions of the wide-
screen TV and set the aspect setting to 16:9
(Full).
SDR-H90&80EB-LSQT1473_mst.book 77 ページ ２００９年１月２７日 火曜日 午前１１時４８分
To Next Page
Loading...
