29
English
Remote Control Transmitter
1 Standby (ON/OFF) button ( )
●
Turns the power on or off when the unit is turned
on at the <Main Power On / Off button>. (see page
30)
2 POSITION
(see page 38)
3 SETUP
(see page 47)
4 ENTER / Cursor buttons (
)
●
Used to operate the menu screens. (see page 36)
5 ZOOM
●
Enters the digital zoom mode. (see page 35)
6 DEFAULT
●
Resets the settings of picture, sound, etc., to
defaults. (see page 38, 40, 41)
7 MUTE
●
Sound mute on / off. (see page 32)
8 ASPECT
●
Adjusts the aspect. (see page 34)
9 VOL + / VOL -
●
Adjusts sound volume level. (see page 32)
10
AUTO SETUP
●
Automatically adjusts the position/size of the
screen. (see page 38)
11
INPUT
●
Switches input to display on the screen. (see page
31)
12
PICTURE
(see page 41)
13
SOUND
(see page 40)
14
RECALL
●
Displays the current setting status of Input mode,
Aspect mode, etc. (see page 32)
15
RETURN
●
Used to return to the previous menu. (see page 36)
16
FUNCTION
●
Displays [Function button guide].
(see page 66)
17
OFF TIMER
●
Switches to stand-by after a fixed period. (see
page 33)
18
Numeric buttons (1 - 6)
●
Used as shortcut buttons by assigning frequently
used operations. (see page 66)
19
Signal emission
Note
●
In this manual, buttons of the remote control and the
unit are indicated as < >.
(Example: <INPUT>.)
The operation is mainly explained indicating the
remote control buttons but you can also operate with
the buttons on the unit when there are the same
buttons.
To Next Page
Loading...
