Panasonic SF4B Series

25 © Panasonic Industrial Devices SUNX Co., Ltd. 2016
<Selecting sensor>
Each function can be set on each SF4B / SF4B<V2> series connected in series as well. Select a
SF4B / SF4B<V2> series to set each function.
Remarks
Since “3-3-5 Copy Function” and “3-3-9 Protective Function” are set collectively, it is not
necessary to select a sensor. Furthermore, when a SF4B / SF4B<V2> series unit is used, CH2
/ CH3 cannot be selected. When two SF4B / SF4B<V2> series in series connection are used,
CH3 cannot be selected.
“3-3-3 Auxiliary Output Switching Function,” “3-3-7 Interlock Setting Changing Function”
or “3-3-8 External Device Monitor Setting Changing Function” is set with CH1 only. CH2 and
CH3 are not indicated.
When using in combination with SF-C14EX, the setting of “Muting sensor output operating set-
ting” of “3-3-5 Copy Function,” “Muting sensor output operating setting” of “3-3-6 Muting Set-
ting Changing Function,” “3-3-7 Interlock Setting Changing Function,” “3-3-8 External De-
vice Monitor Setting Changing Function” and “3-3-12 Override Setting Changing Function
(Ver. 2.1 only)” cannot be changed.
Function Setting
*: When the units are not in series connection, it is not indicated.
CH3 (Sub sensor 2)
CH2 (Sub sensor 1)
CH1 (Main sensor)
ALL (All sensor) (*)
Emitter
Receiver
Emitter
Receiver
Emitter
Receiver
Ramco Innovations
(
800
)
280-6933 www.PanasonicSensors.com