EasyManuals Logo

Panasonic SF4B Series User Manual

Panasonic SF4B Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
7 © Panasonic Industrial Devices SUNX Co., Ltd. 2016
Connecting / Setting Procedures
2-3 Connecting / Setting Procedures
This section describes the connecting / setting procedures for both this device and SF4B /
SF4B<V2> series or SF-C14EX.
2-3-1 When Using with Light Curtain SF4B / SF4B<V2> Series Only
<When using the 8-core cable>
1. Set the SF4B / SF4B<V2> series, and
check that the SF4B / SF4B<V2> series
works properly. For mounting method of
SF4B / SF4B<V2> series, refer to the re-
spective Instruction Manuals.
2. Turn OFF the power, and disconnect the ex-
tension cable with connectors connected to
SF4B / SF4B<V2> series, and then connect
this device between SF4B / SF4B<V2> se-
ries (emitter or receiver) and the extension
cable with connectors.
Bottom cap
cable
SF4B / SF4B<V2>
series
Extension cable
with connectors
To power supply
FUNCTION
CANCEL
ENTER
Bottom cap
cable
SF4B / SF4B<V2> series
(Emitter or receiver)
Extension cable
with connectors
To power supply
This device
3. Turn ON the power, and set the function with this device.
After the power of this device is ON, approx. 30 sec. will be taken for data transmission with SF4B
/ SF4B<V2> series. While data transmission, “
” lights up in revolving.
The control output (OSSD 1 / 2) of SF4B / SF4B<V2> series is set to “OFF” while this device
has been connected.
REFERENCE Refer to “3-1 Functional Descriptions <When Using with Light Curtain SF4B /
SF4B<V2> Series Only>” for the details of the functions, and refer to “3-3 Function Set-
ting (Operation Procedure)” for the setting procedures of the functions respectively.
4. Turn OFF the power, then remove this device.
5. Connect both SF4B / SF4B<V2> series and the extension cable with connectors and return the
device to the state described in procedure 1.
6. Check that the SF4B / SF4B<V2> series works as set at the procedure 3.
Then, inspect the SF4B / SF4B<V2> series.
REFERENCE Refer to Chapter 4 Maintenance” of the SF4B / SF4B<V2> series instruction manual for
the details of the inspection of the SF4B / SF4B<V2> series.
Ramco Innovations
(
800
)
280-6933 www.PanasonicSensors.com

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic SF4B Series and is the answer not in the manual?

Panasonic SF4B Series Specifications

General IconGeneral
BrandPanasonic
ModelSF4B Series
CategoryController
LanguageEnglish

Related product manuals