Panasonic SF4C Series - Page 33

33
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
English
WARNING
♦
Maintenance
• When replacement parts are required, always use only genuine supplied replace-
ment parts. If substitute parts from another manufacturer are used, the device may
not come to detect, result in death or serious injury.
• The periodical inspection of this device must be performed by an engineer having the
special knowledge.
• After maintenance or adjustment, and before starting operation, test this device fol-
lowing the procedure specied in “
10. Maintenance
.”
• Clean this device with a clean cloth. Do not use any volatile chemicals.
♦
Others
• Never modify this device. Modication may cause the device not to detect, resulting
in death or serious injury.
• Do not use this device to detect objects ying over the sensing area.
• Do not use this device to detect transparent objects, translucent objects or objects
smaller than the specied minimum sensing objects.
2. Conrmation of Packed Contents
□ Sensor: Emitter, Receiver 1 pc. each
□ Test rod 1 pc.
SF4C-F
□
：
SF4C-TR14
(ø14mm)
、
SF4C-H
□
：
SF4C-TR25
(ø25mm)
□ Abridged Instruction Manual 1 pc.