Panasonic SH-FX85

RQTX0051
11
Troubleshooting guide
ENGLISH
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the table do not solve the problem, refer to
the “Customer Services Directory” on page 9 if you reside in the U.S.A., or refer to the “Product information” on page 3 if you reside in Canada.
On your home theater unit
The wireless link
indicator (e.g. “ [W2] ” or
an indicator) does not
light.
≥ Ensure that the digital transmitter is fully inserted into the slot of the home theater unit.
≥ Check that the home theater unit is turned on, and the wireless sound system is turned on.
The wireless link
indicator (e.g. “ [W2] ” or
an indicator) is flashing.
≥ There is no link between the home theater unit and the wireless sound system. Check that the wireless sound system is plugged into the AC outlet
and is turned on.
≥ Ensure that the selector on the wireless sound system is set to “WIRELESS”.
≥ Ensure that the wireless sound system is within 30 m (?? ft) of the home theater unit.
≥ When pairing your existing wireless accessories with SH-FX85T digital transmitter, ensure the corresponding wireless accessories are plugged
into the AC outlet and are turned on.
The wireless link
indicator (e.g. “ [W2] ” or
or an indicator) is lit, but
there is no sound from
the SB-FX85 wireless
sound system.
≥ When playing from a 2-channel audio source (e.g. AM/FM station, music CD, etc.), turn on one of the surround sound effects of your home theater
system (e.g. Surround Music) in order to utilize all audio channels.
(Refer also to your home theater unit’s operating instructions.)
≥ When using the wireless sound system as a stand-alone audio amplifier, ensure to select the correct input selector on the wireless sound system.
The wireless link
indicator (e.g. “ [W2] ” or
or an indicator) is lit, but
there is no sound from
the wireless accessory
after pairing.
≥
When playing from a 2-channel audio source (e.g. AM/FM station, music CD, etc.), turn on one of the surround sound effects of your home theater
system (e.g. Surround Muisc) in order to utilize all audio channels.
(Refer also to your home theater unit’s operating instructions.)
≥
The wrong transmitter card has been inserted into the home theater unit. (The SH-FX65T transmitter card cannot be used with the SH-FX85
wireless sound system.)
1. Turn off your home theater system, remove the SH-FX65T transmitter card, and insert the SH-FX85T transmitter card.
2. Turn on your home theater system, and then follow the pairing procedure on page 5.
3. Adjust the volume of your home theater unit.
After pairing the
SB-FX85 wireless sound
system with the wireless
accessory, audio output
is erratic.
≥ Ensure to unplug the SB-FX85 wireless sound system belonging to the SH-FX85T digital transmitter card in use, and then repeat the pairing
procedure on page 5.
RQTX_FX85_En.fm Page 11 Thursday, December 21, 2006 2:56 PM