RQT7022
24
A
(Video CDs only)
The on-screen-display (OSD) shows CD information and
the condition of this unit.
You can turn the OSD on and off.
Press [OSD].
Each time you press the button:
OSD OFF ↔ OSD ON
OSD OFF
B: information is not displayed when you
press the buttons.
OSD ON
C: information is displayed when you press
the buttons.
Note
The unit is always in OSD ON mode when turned on.
Repeat function/Random
function A
B
C
OSD OFF
OSD ON
PLA
OSD
12
34
(For video CDs and audio CDs)
Preparation:
Set play mode selector to [PBC OFF].
Press [PLAY MODE] during play or stop
mode.
The setting is switched in the sequence indicated below
each time [PLAY MODE] is pressed.
1 1-track repeat (1
) ←
One track is repeated.
↓
2 All-track repeat (
)
All the tracks on the disc are repeated.
↓
3 Random (RANDOM)
Each track plays once in random order
and then play stops.
↓
4 Random repeat (RANDOM
)
The tracks play repeatedly in random order.
↓
Cancel (no indicator is shown)
Note
•
You cannot select random play or random repeat play
during program mode.
•
The mode is cancelled when you stop the disc during
play mode, open the CD lid or disconnect the power
source.
•
You cannot use the numeric keys to select your desired
tracks during random play or random repeat play.
•
The resume function does not work when random or
random repeat is on.
•
During random play, the skip buttons cannot be used to
skip back to tracks that were played previously in the
random sequence.
Changing TV display
mode (OSD)
To Next Page
Loading...
