Replacement Parts List
Important Safety Notice
Components identified by mark have special characteristics important for safety.
When replacing any of these components, use manufacturer’s specified parts.
Note : Printed circuit board assembly with “NLA” is no longer
available after production discontinuation of the complete set.
Abbreviation of part name and description
1. Resistor 2. Capacitor
Example : Example :
ERD25TJ104 C 100KOHM, J, 1/4W ECKF1H103ZF C 0.01UF, Z, 50V
Type Allowance Type Allowance
Type Allowance Type Allowance
C : Carbon F : +/- 1% C : Carbon C : +/- 0.25pF
F : Fuse G : +/- 2% E : Electrolytic D : +/- 0.5pF
M : Metal Oxide J : +/- 5% P : Polyester F : +/- 1pF
Metal Film K : +/- 10% Polypropylene G : +/- 3%
S : Solid M : +/- 20% T : Tantalum J : +/- 5%
W : Wire Wound K: +/- 10%
L : +/- 15%
M : +/- 20%
P : +100%, -0%
Z : +80%,-20%
∆
To Next Page
Loading...
